Refereed Journal Articles

S. Kultayeva, Y.W. Kim, Electrical, thermal, and mechanical properties of porous silicon carbide ceramics with a boron carbide additive, Int. J. Appl. Ceram. Technol. in press, https://doi.org/10.1111/ijac.14113.

J.A. Yeom, E.S. Kang, Y.W. Kim, W.H. Nam, Microstructure and properties of porous SiC ceramics with AlN-RE2O3 (RE = Sc, Y, Lu) additives, J. Eur. Ceram. Soc. 42 (2022) 4446-4455, https://doi.org/10.1016/j.jeurceramsoc.2022.04.050

M.S. Anwar, S.Z.A. Bukhari, J.H. Ha, J.M. Lee, I.H. Song, Y.W. Kim, Controlling the electrical resistivity of porous silicon carbide ceramics and their applications: A review, Int. J. Appl. Ceram. Technol. 19 (2022) 1814-1840, https://doi.org/10.1111/ijac.14034

J.A. Yeom, Y.W. Kim, Effect of carbon content on electrical, thermal, and mechanical properties of porous SiC ceramics with B4C and C additives, J. Eur. Ceram. Soc. 42 (2022) 4076-4085, https://doi.org/10.1016/j.jeurceramsoc.2022.04.004

M.D. Sosa Lucio, S. Kultayeva, Y.W. Kim, I.H. Song, Effects of SiC whisker addition on mechanical, thermal, and permeability properties of porous silica-bonded SiC ceramics, Int. J. Appl. Ceram. Technol. 19 (2022) 1439-1452, https://doi.org/10.1111/ijac.13957

S. Rajpoot, E.S. Kang, Y.W. Kim, Processing and properties of water-absorbing zeolite-based porous ceramics, J. Korean Ceram. Soc. 59 (2022) 94-103, https://doi.org/10.1007/s43207-021-00160-2

S.K. Sharma, L. Gurnani, M.K. Jangid, K.V.M. Krishna, A. Mukhopadhyay, Y.W. Kim, B.V. Manoj Kumar, Sub-surface microstructural investigation for establishing micro-mechanisms of wear in sliding of SiC and SiC-WC ceramics, Wear 492-493 (2022) 204236, https://doi.org/10.1016/j.wear.2022.204236

E.S. Kang, Y.W. Kim, K.Y. Lim, S.J. Lee, New quaternary additive for processing fully ceramic microencapsulated fuels without applied pressure, J. Eur. Ceram. Soc. 42 (2022) 1238-1248, https://doi.org/10.1016/j.jeurceramsoc.2021.12.026

R. Malik, E.H. Ryu, Y.W. Kim, Pressureless joining of SiC ceramics with magnesia-alumina-silica glass-ceramics, Int. J. Appl. Ceram. Technol. 19 (2022) 992-1000, https://doi.org/10.1111/ijac.13899

R. Malik, Y.W. Kim, Effects of initial α-phase content on properties of pressureless solid-state sintered SiC ceramics, Int. J. Appl. Ceram. Technol. 19 (2022) 703-712, https://doi.org/10.1111/ijac.13892

Z. Huang, X. Luo, D. Jia, H.T. Lin, Y. Meng, Y.W. Kim, MicroStructural Hierarchy Descriptor (μSHD)?property correlations of silicon carbide ceramics, J. Eur. Ceram. Soc. 42 (2022) 801-819, https://doi.org/10.1016/j.jeurceramsoc.2021.11.024.

T. Maity and Y.W. Kim, High-temperature strength of liquid-phase-sintered silicon carbide ceramics: A review, Int. J. Appl. Ceram. Technol. 19 (2022) 130-148, https://doi.org/10.1111/ijac.13805.

R. Malik, Y.W. Kim, Effect of AlN addition on the electrical resistivity of pressureless sintered SiC ceramics with B4C and C, J. Am. Ceram. Soc. 104 (2021) 6086-6091. https://doi.org/10.1111/jace.18003.

R. Malik, Y.W. Kim, Pressureless solid-state sintering of SiC ceramics with BN and C additives, J. Asian Ceram. Soc. 9 (2021) 1165-1172, https://doi.org/10.1080/21870764.2021.1946268.

S. Kultayeva, Y.W. Kim, I.H. Song, Influence of sintering atmosphere and BN additives on microstructure and properties of porous SiC ceramics, J. Eur. Ceram. Soc. 41 (2021) 6925-6933, https://doi.org/10.1016/j.jeurceramsoc.2021.07.039.

Y.H. Kim, J.Y. Lee, M.K. Cho, J.P. Ahn, Y.W. Kim, Electrical resistivity at the micron scale in a polycrystalline SiC ceramic, Ceram. Int. 47 (2021) 27100-27106, https://doi.org/10.1016/j.ceramint.2021.06.123.

S. Rajpoot, R. Malik, and Y.W. Kim, Low thermal conductivity in porous SiC?SiO2?Al2O3?TiO2 ceramics induced by multiphase thermal resistance, Ceram. Int. 47 (2021) 20161-20168, https://doi.org/10.1016/j.ceramint.2021.04.022.

S. Kultayeva, Y.W. Kim, I.H. Song, Effects of dopants on electrical, thermal, and mechanical properties of porous SiC ceramics, J. Eur. Ceram. Soc. 41 (2021) 4006-4015. https://doi.org/10.1016/j.jeurceramsoc.2021.01.049

G.D. Kim, Y.W. Kim, Processing of fully ceramic microencapsulated fuels with a small amount of additives by hot-pressing, J. Eur. Ceram. Soc. 41 (2021) 3980-3990. https://doi.org/10.1016/j.jeurceramsoc.2021.02.020

S. Rajpoot, J.H. Ha, Y.W. Kim, Effects of initial particle size on mechanical, thermal, and electrical properties of porous SiC ceramics, Ceram. Int. 47 (2021) 8668-8676, https://doi.org/10.1016/j.ceramint.2020.11.238.

E.S. Kang, Y.W. Kim, W.H. Nam, Multiple thermal resistance induced extremely low thermal conductivity in porous SiC-SiO2 ceramics with hierarchical porosity, J. Eur. Ceram. Soc. 41 (2021) 1171-1180, https://doi.org/10.1016/j.jeurceramsoc.2020.10.004.

R. Malik, Y.W. Kim, W.H. Nam, Intrinsic microstructures of silica-bonded porous nano-SiC ceramics, J. Am. Ceram. Soc. 104 (2021) 706-710, https://doi.org/10.1111/jace.17523.

R. Malik, Y.W. Kim, Plastic deformation-induced improved mechanical and thermal properties in hot-forged SiC-TiC composite, J. Eur. Ceram. Soc. 41 (2021) 213-224. https://doi.org/10.1016/j.jeurceramsoc.2020.08.020.

H.M. Kim, E.S. Kang, Y.W. Kim, K.Y. Lim, S.J. Lee, Pressureless sintering of fully ceramic microencapsulated fuels, J. Eur. Ceram. Soc., 40 (2020) 5180-5185. https://doi.org/10.1016/j.jeurceramsoc.2020.07.036.

N.V. Dorkar, Y.W. Kim, B.V. Manoj Kumar, Influence of temperature, impact angle and h-BN content on the erosive wear behavior of hot-pressed SiC-BN composites, Wear 458-459 (2020) 203447. https://doi.org/10.1016/j.wear.2020.203447.

S. Rajpoot, J.H. Ha, Y.W. Kim, K.J. Kim, Electrical, thermal, and mechanical properties of porous SiC-nitride composites, J. Eur. Ceram. Soc. 40 (2020) 3851-3862. https://doi.org/10.1016/j.jeurceramsoc.2020.04.018.

S. Kultayeva, Y.W. Kim, Mechanical, thermal, and electrical properties of pressureless sintered SiC-AlN ceramics, Ceram. Int. 46 (2020) 19264-19273. https://doi.org/10.1016/j.ceramint.2020.04.266.

R. Malik, Y.H. Kim, Y.W. Kim, Effect of additive content on the mechanical and thermal properties of pressureless liquid-phase sintered SiC, J. Asian Ceram. Soc. 8 (2020) 448-459. https://doi.org/10.1080/21870764.2020.1749376.

R. Malik, Y.W. Kim, K.J. Kim, B.V. Manoj Kumar, Tuning the electrical, thermal, and mechanical properties of SiC-BN composites using sintering additives, J. Asian Ceram. Soc. 8 (2020) 353-364. https://doi.org/10.1080/21870764.2020.1743412

G.D. Kim, Y.W. Kim, I.H. Song, K.J. Kim, Effects of carbon and silicon on electrical, thermal, and mechanical properties of porous silicon carbide ceramics, Ceram. Int. 46 (2020) 15594-15603. https://doi.org/10.1016/j.ceramint.2020.03.106.

Y.H. Kim, Y.W. Kim, W.S. Seo, Processing and properties of silica-bonded porous nano-SiC ceramics with extremely low thermal conductivity, J. Eur. Ceram. Soc. 40 (2020) 2623-2633, https://doi.org/10.1016/j.jeurceramsoc.2019.11.072.

S. Kultayeva, J.H. Ha, R. Malik, Y.W. Kim, K.J. Kim, Effects of porosity on electrical and thermal conductivities of porous SiC ceramics, J. Eur. Ceram. Soc. 40 (2020) 996-1004, https://doi.org/10.1016/j.jeurceramsoc.2019.11.045.

K.J. Kim, R. Malik, J. Park, Y.W. Kim, Effects of M2O3-Y2O3 (M=Sc and Al) additives on electrical conductivity of hot-pressed SiC ceramics, Ceram. Int. 46 (2020) 5454-5458, https://doi.org/10.1016/j.ceramint.2019.10.194.

R. Malik, Y.W. Kim, I.H. Song, High Interfacial thermal resistance induced low thermal conductivity in porous SiC-SiO2 composites with hierarchical porosity, J. Eur. Ceram. Soc. 40 (2020) 594-602,https://doi.org/10.1016/j.jeurceramsoc.2019.10.056.

O. Hanzel, Z. Lences, Y.W. Kim, J. Fedor, P. Sajgalik, Highly electrically and thermally conductive silicon carbide-graphene composites with yttria and scandia additives, J. Eur. Ceram. Soc. 40 (2020) 241-250, https://doi.org/10.1016/j.jeurceramsoc.2019.10.001.

Y.W. Kim, S. Kultayeva, J. Sedlacek, O. Hanzel, P. Tatarko, Z. Lences, P. Sajgalik, Thermal and electrical properties of additive-free rapidly hot pressed SiC ceramics, J. Eur. Ceram. Soc. 40 (2020) 234-240. https://doi.org/10.1080/10408436.2018.1532394

Y.W. Kim, Y.H. Kim, K.J. Kim, Electrical properties of liquid-phase sintered silicon carbide ceramics: a review, Crit. Rev. Solid State, 45 (2020) 66-84. https://doi.org/10.1080/10408436.2018.1532394

Y.W. Kim, E. Tochigi, J. Tatami, Y.H. Kim, S.H. Jang, S. Javvaji, J. Jung, K.J. Kim, Y. Ikuhara, Carrier depletion near the grain boundary of a SiC bicrystal, Sci. Rep. 9 (2019) 18014. https://doi.org/10.1038/s41598-019-54525-z

S. Rajpoot, R. Malik, Y.W. Kim, Effects of polysiloxane on thermal conductivity and compressive strength of porous silica ceramics, Ceram. Int. 45 (2019) 21270-21277. https://doi.org/10.1016/j.ceramint.2019.07.109

C. Durif, M. Wynn, M. Balestrat, G. Franchin, Y.W. Kim, A. Leriche, P. Miele, P. Colombo, S. Bernard, Open-cell silicon carbide foams with high porosity from boron-modified polycarbosilanes, J. Eur. Ceram. Soc., 39, 5114-5122 (2019). https://doi.org/10.1016/j.jeurceramsoc.2019.08.012

Y.H. Kim, Y.W. Kim, Direct bonding of silicon carbide ceramics sintered with yttria, J. Eur. Ceram. Soc., 39, 4487-4494 (2019). https://doi.org/10.1016/j.jeurceramsoc.2019.07.034

H.M. Kim, Y.W. Kim, K.Y. Lim, Pressureless sintered silicon carbide matrix with a quaternary additive for fully ceramic microencapsulated fuels, J. Eur. Ceram. Soc., 39, 3971-3980 (2019). https://doi.org/10.1016/j.jeurceramsoc.2019.06.008

R. Malik, S.H. Jang, Y.W. Kim, T. Nishimura, Mechanical properties of silicon carbide-in situ zirconium carbonitride composites, Int. J. Appl. Ceram. Technol., 16, 1304-1313 (2019). https://doi.org/10.1111/ijac.13213

Y.H. Kim, S.H. Jang, Y.W. Kim, Joining of silicon carbide ceramics using a silicon carbide tape, Int. J. Appl. Ceram. Technol., 16, 1295-1303 (2019). https://doi.org/10.1111/ijac.13202

H.M. Kim, Y.W. Kim, Low temperature pressureless sintering of silicon carbide ceramics with alumina-yttria-magnesia-calcia, J. Ceram. Soc. Jpn., 127, 207-214 (2019). https://doi.org/10.2109/jcersj2.19024

S.K. Sharma, B.V. Manoj Kumar, Y.W. Kim, Tribology of WC reinforced SiC ceramics: Influence of Counterbody, Friction, 7, 129-142 (2019). https://doi.org/10.1007/s40544-017-0194-2

Y.H. Kim, Y.W. Kim, K.J. Kim, Electrically conductive SiC ceramics processed by pressureless sintering, Int. J. Appl. Ceram. Technol., 16, 843-849 (2019). https://doi.org/10.1111/ijac.13131

H.Y. Sheng, Y.W. Kim, I.H Song, Processing of silicon-derived silica-bonded silicon carbide membrane supports, Ceram. Int., 45, 2161-2169 (2019). https://doi.org/10.1016/j.ceramint.2018.10.126

Y.H. Kim, Y.W. Kim, K.Y. Lim, S.J. Lee, Mechanical and thermal properties of silicon carbide ceramics with yttria-scandia-magnesia, J. Eur. Ceram. Soc. 39 (2019) 144-149. https://doi.org/10.1016/j.jeurceramsoc.2018.09.021

R. Malik, H.M. Kim, Y.W. Kim, K.J. Kim, Grain-growth-induced high electrical conductivity in SiC-BN composites, Ceram. Int. 44 (2018) 16394-16399. https://doi.org/10.1016/j.ceramint.2018.06.049

J.Y. Gwon, S.H. Jang, W.T. Kwon, Y.W. Kim, Micro electrical discharge drilling characteristics of conductive SiC-Ti2CN composite, J. Mech. Sci. Technol. 32 (2018) 3351-3358. https://doi.org/10.1007/s12206-018-0638-2

T.Y. Cho, R. Malik, Y.W. Kim, K.J. Kim, Electrical and mechanical properties of pressureless sintered SiC-Ti2CN composites, J. Eur. Ceram. Soc. 38 (2018) 3064-3072. http://dx.doi.org/10.1016/j.jeurceramsoc.2018.03.040

J.H. Eom, Y.W. Kim, K.J. Kim, W.S. Seo, Improved electrical and thermal conductivities of polysiloxane-derived silicon oxycarbide ceramics by barium addition, J. Eur. Ceram. Soc. 38 (2018) 487-493. https://doi.org/10.1016/j.jeurceramsoc.2017.09.045

Y.K. Seo, J.H. Eom, Y.W. Kim, Process-tolerant pressureless-sintered silicon carbide ceramics with alumina-yttria-calcia-strontia, J. Eur. Ceram. Soc. 38 (2018) 445-452. https://doi.org/10.1016/j.jeurceramsoc.2017.09.011

B.N. Kim, N. Horiuchi, A. Dash, Y.W. Kim, K. Morita, H. Yoshida J.G. Li, Y. Sakka, Spark plasma sintering of highly transparent hydroxyapatite ceramics, J. Jpn. Soc. Powder Powder Metallurgy, 64 (2017) 547-551. https://doi.org/10.2497/jjspm.64.547

S.K. Sharma, B.V.M. Kumar, B.B. Zugelj, M. Kalin, Y.W. Kim, Room and high temperature reciprocated sliding wear behavior of SiC-WC composites, Ceram. Int. 43 (2017) 16827-16834. https://doi.org/10.1016/j.ceramint.2017.09.080

Y.W. Kim, S.H. Jang, T. Nishimura, S.Y. Choi, S.D. Kim, Microstructure and high-temperature strength of silicon carbide with 2000 ppm yttria, J. Eur. Ceram. Soc. 37 (2017) 4449-4455. https://doi.org/10.1016/j.jeurceramsoc.2017.07.002

S.K. Sharma, B.V.M. Kumar, Y.W. Kim, Effect of impingement angle and WC content on high temperature erosion behavior of SiC-WC composites, Int. J. Refract. Met. Hard Mater. 68 (2017) 166-171. https://doi.org/10.1016/j.ijrmhm.2017.07.014

E.H. Jang, E.J. Kim, H.J. Kim, T.H. Lee, H.J. Yeom, Y.W. Kim, J.G. Choi, Formation of ZIF-8 membranes inside porous supports for improving both their H2/CO2 separation performance and thermal/mechanical stability, J. Membr. Sci. 540 (2017) 430-439. https://doi.org/10.1016/j.memsci.2017.06.072

T.Y. Cho, Y.W. Kim, Effect of grain growth on the thermal conductivity of liquid-phase sintered silicon carbide ceramics, J. Eur. Ceram. Soc. 37 (2017) 3475-3481. https://doi.org/10.1016/j.jeurceramsoc.2017.04.050

S.C. Kim, H.J. Yeom, Y.W. Kim, I.H. Song, J.H. Ha, Processing of alumina-coated glass-bonded silicon carbide membranes for oily wastewater treatment, Int. J. Appl. Ceram. Technol. 14 (2017) 692-702. https://doi.org/10.1111/ijac.12693

Y.K. Seo, Y.W. Kim, T. Nishimura, W.S. Seo, High thermal conductivity of spark plasma sintered silicon carbide ceramics with yttria and scandia, J. Am. Ceram. Soc. 100 (2017) 1290-1294. https://doi.org/10.1111/jace.14748

K.J. Kim, J.H. Eom, Y.W. Kim, W.S. Seo, M.J. Lee, S.S. Hwang, Highly resistive SiC ceramics sintered with Al2O3-AlN-Y2O3 additions, Ceram. Int. 43 (2017) 5343-5346. http://dx.doi.org/10.1016/j.ceramint.2017.01.058

S.C. Kim, Y.W. Kim, I.H. Song, Processing and properties of glass-bonded silicon carbide membrane supports, J. Eur. Ceram. Soc. 37 (2017)1225-1232. https://doi.org/10.1016/j.jeurceramsoc.2016.11.019

S.H. Jang, Y.W. Kim, K.J. Kim, Electrical and thermal properties of SiC-Zr2CN composites sintered with Y2O3-Sc2O3 additives, J. Eur. Ceram. Soc. 37 (2017) 477-484. https://doi.org/10.1016/j.jeurceramsoc.2016.09.001

B.N. Kim, A. Dash, Y.W. Kim, K. Morita, H. Yoshida, J. G. Li, Y. Sakka, Low-temperature spark plasma sintering of alumina by using SiC molding set, J. Ceram. Soc. Jpn. 124 (2016) 1141-1145. https://doi.org/10.2109/jcersj2.16082

K.J. Kim, S.H. Jang, Y.W. Kim, B.K. Jang, T. Nishimura, Conductive SiC ceramics fabricated by spark plasma sintering, Ceram. Int. 42 (2016) 17892-17896. https://doi.org/10.1016/j.ceramint.2016.07.126

Y.K. Seo, Y.W. Kim, K.J. Kim, W.S. Seo, Electrically conductive SiC-BN composites, J. Eur. Ceram. Soc. 36 (2016) 3879-3887. https://doi.org/10.1016/j.jeurceramsoc.2016.06.040

Y.K. Seo, Y.W. Kim, T. Nishimura, W.S. Seo, High-temperature strength of a thermally conductive silicon carbide ceramic sintered with yttria and scandia, J. Eur. Ceram. Soc. 36 (2016) 3755-3760. https://doi.org/10.1016/j.jeurceramsoc.2016.02.028

S.H. Jang, Y.W. Kim, K.J. Kim, Effects of Y2O3?RE2O3 (RE=Sm, Gd, Lu) additives on electrical and mechanical properties of SiC ceramics containing Ti2CN, J. Eur. Ceram. Soc. 36 (2016) 2997-3003. https://doi.org/10.1016/j.jeurceramsoc.2015.09.042

K.J. Kim, J.H. Eom, T.Y. Koh, Y.W. Kim, W.S. Seo, Effect of carbon addition on the electrical properties of bulk silicon-oxycarbide ceramics, J. Eur. Ceram. Soc. 36 (2016) 2705-2711. https://doi.org/10.1016/j.jeurceramsoc.2016.04.034

T.Y. Cho, Y.W. Kim, K.J. Kim, Thermal, electrical, and mechanical properties of pressureless sintered silicon carbide ceramics with yttria-scandia-aluminum nitride, J. Eur. Ceram. Soc. 36 (2016) 2659-2665. https://doi.org/10.1016/j.jeurceramsoc.2016.04.014

J.H. Eom, Y.K. Seo, Y.W. Kim, Mechanical and thermal properties of pressureless sintered silicon carbide ceramics with alumina-yttria-calcia, J. Am. Ceram. Soc. 99 (2016) 1735-1741. https://doi.org/10.1111/jace.14114

H.J. Yeom, S.C. Kim, Y.W. Kim, I.H. Song, Processing of alumina-coated clay-diatomite composite membranes for oily wastewater treatment, Ceram. Int. 42 (2016) 5024-5035. https://doi.org/10.1016/j.ceramint.2015.11.177

S.H. Jang, Y.W. Kim, K.J. Kim, S.J. Lee, K.Y. Lim, Effects of Y2O3?RE2O3 (RE = Sm, Gd, Lu) additives on electrical and thermal properties of silicon carbide ceramics, J. Am. Ceram. Soc. 99 (2016) 265-272. https://doi.org/10.1111/jace.13958

S. K. Sharma, B.V. Manoj Kumar, Y.W. Kim, Tribological behavior of silicon carbide ceramics-a review, J. Korean Ceram. Soc. 53 (2016) 581-596. https://doi.org/10.4191/kcers.2016.53.6.581

K.J. Kim, M.H. Kim, Y.W. Kim, Highly conductive p-type zinc blende SiC thin films fabricated on silicon substrates by magnetron sputtering, J. Am. Ceram. Soc. 98 (2015) 3663-3665. https://doi.org/10.1111/jace.13988

K.J. Kim, T.Y. Cho, Y.W. Kim, T. Nishimura, E. Narimatsu, Electrical and thermal properties of silicon carbide-boron nitride composites prepared without sintering additives, J. Eur. Ceram. Soc. 35 (2015) 4423-4429. https://doi.org/10.1016/j.jeurceramsoc.2015.08.011

S. Gupta, S K. Sharma, B.V.M. Kumar, Y.W. Kim, Tribological characteristics of SiC ceramics sintered with a small amount of yttria, Ceram. Int. 41 (2015) 14780-14789. https://doi.org/10.1016/j.ceramint.2015.07.210

Y.W. Kim, T.Y. Cho, K.J. Kim, Effect of grain growth on electrical properties of silicon carbide ceramics sintered with gadolinia and yttria, J. Eur. Ceram. Soc. 35 (2015) 4137-4142. https://doi.org/10.1016/j.jeurceramsoc.2015.08.006

K.J. Kim, Y.W. Kim, K.Y. Lim, T. Nishimura, E. Narimatsu, electrical and thermal properties of SiC-AlN ceramics without sintering additives, J. Eur. Ceram. Soc. 35 (2015) 2715-2721. https://doi.org/10.1016/j.jeurceramsoc.2015.04.010

K.J. Kim, J.H. Eom, Y.W. Kim, W.S. Seo, Electrical conductivity of dense, bulk silicon-oxycarbide ceramics, J. Eur. Ceram. Soc. 35 (2015) 1355-1360. https://doi.org/10.1016/j.jeurceramsoc.2014.12.007

J.H. Eom, H.J. Yeom, Y.W. Kim, I.H. Song, Ceramic membranes prepared from a silicate and clay-mineral mixture for treatment of oily wastewater, Clays Clay Miner. 63 (2015) 222-234. https://doi.org/10.1346/CCMN.2015.0630305

J.H. Eom, Y.K. Seo, Y.W. Kim, S.J. Lee, Effect of additive composition on mechanical properties of pressureless sintered silicon carbide ceramics sintered with alumina, aluminum nitride, and yttria, Met. Mater. Int. 21 (2015) 525-530. DOI:10.1007/s12540-015-4383-0

H.K. Yoo, J.H. Ko, K.Y. Lim, W.T. Kwon, Y.W. Kim, Micro-electrical discharge machining characteristics of newly developed conductive SiC Ceramic, Ceram. Int. 41 (2015) 3490-3496. https://doi.org/10.1016/j.ceramint.2014.10.175

S.K. Sharma, B.V.M. Kumar, Y.W. Kim, Effect of WC addition on sliding wear behavior of SiC ceramics, Ceram. Int. 41 (2015) 3427-3437. https://doi.org/10.1016/j.ceramint.2014.10.144

J.H. Eom, Y.W. Kim, Effect of starting particle size and barium addition on flexural strength of polysiloxane-derived SiOC ceramics, J. Ceram. Soc. Jpn. 123 (2015) 142-146. https://doi.org/10.2109/jcersj2.123.142

K.M. Kim, S.H. Jang, Y.W. Kim, W.S. Seo, Thermal and mechanical properties of SiC-TiC0.5N0.5 composites, J. Am. Ceram. Soc. 98 (2105) 616-623. https://doi.org/10.1111/jace.13311

H.J. Yeom, Y.W. Kim, K.J. Kim, Electrical, thermal and mechanical properties of silicon carbide-silicon nitride composites sintered with yttria and scandia, J. Eur. Ceram. Soc. 35 (2015) 77-86. https://doi.org/10.1016/j.jeurceramsoc.2014.08.011

J.H. Eom, Y.W. Kim, I.H. Song, Effect of strontium carbonate content on flexural strength of clay-based membrane supports, J. Korean Ceram. Soc. 52 (2015) 467-472. https://doi.org/10.4191/kcers.2015.52.6.467

Y.I. Lee, J.H. Eom, Y.W. Kim, I.H. Song, Effect of alkaline-earth oxide additives on flexural strength of clay-based membrane supports, J. Korean Ceram. Soc. 52 (2015) 180-85. https://doi.org/10.4191/kcers.2015.52.3.180

J.H. Eom, Y.W. Kim, Flexural strength of polysiloxane-derived strontium-doped SiOC ceramics, J. Korean Ceram. Soc. 52 (2015) 61-65. https://doi.org/10.4191/kcers.2015.52.1.61

W. Zhai, Y. Chen, J. Ling, B. Wen, Y.W. Kim, Fabrication of lightweight, flexible polyetherimide/ nickel composite foam with electromagnetic interference shielding effectiveness reaching 103 dB, J. Cell. Plast., 50 (2014) 537-550. https://doi.org/10.1177%2F0021955X14540198

K.J. Kim, K. Y. Lim, Y.W. Kim, Electrically and thermally conductive SiC ceramics, J. Ceram. Soc. Jpn. 122 (2014) 963-966. https://doi.org/10.2109/jcersj2.122.963

K.J. Kim, K.Y. Lim, Y.W. Kim, Electrical and thermal properties of SiC ceramics sintered with yttria and nitrides, J. Am. Ceram. Soc. 97 (2014) 2943-2949. https://doi.org/10.1111/jace.13031

J.H. Eom, Y.W. Kim, S.H. Yun, I.H. Song, Low-cost clay-based membranes for oily wastewater treatment, J. Ceram. Soc. Jpn. 122 (2014) 788-794. https://doi.org/10.2109/jcersj2.122.788

K.Y. Lim, Y.W. Kim, K.J. Kim, Mechanical properties of electrically conductive silicon carbide ceramics, Ceram. Int. 40 (2014) 10577-10582. https://doi.org/10.1016/j.ceramint.2014.03.036

K.Y. Lim, Y.W. Kim, K.J. Kim, Electrical properties of SiC ceramics sintered with 0.5 wt% AlN-RE2O3 (RE=Y, Nd, Lu), Ceram. Int. 40 (2014) 8885-8890. https://doi.org/10.1016/j.ceramint.2013.12.157

K.J. Kim, K.Y. Lim, Y.W. Kim, M.J. Lee, W.S. Seo, Electrical resistivity of α-SiC ceramics with Al2O3 or AlN additives, J. Eur. Ceram. Soc. 34 (2014) 1695-1701. https://doi.org/10.1016/j.jeurceramsoc.2014.01.004

S.K. Sharma, B.V.M. Kumar, K.Y. Lim, Y.W. Kim, S.K. Nath, Erosion behavior of SiC-WC composites, Ceram. Int. 40 (2014) 6829-6839. https://doi.org/10.1016/j.ceramint.2013.11.146

K.J. Kim, K.M. Kim, Y.W. Kim, Highly conductive SiC ceramics containing Ti2CN, J. Eur. Ceram. Soc. 34 (2014) 1149-1154. https://doi.org/10.1016/j.jeurceramsoc.2013.11.001

Y.W. Kim, K. Y. Lim, W.S. Seo, Microstructure and thermal conductivity of silicon carbide with yttria and scandia, J. Am. Ceram. Soc. 97 (2014) 923-928. https://doi.org/10.1111/jace.12737

Y.I. Lee, J.H. Eom, Y.W. Kim, I.H. Song, Effect of clay-mineral composition on flexural strength of clay-based membranes, J. Korean Ceram. Soc. 51 (2014) 380-385. https://doi.org/10.4191/kcers.2014.51.5.380

K.J. Kim, K.Y. Lim, Y.W. Kim, Control of electrical resistivity in silicon carbide ceramics sintered with aluminum nitride and yttria, J. Am. Ceram. Soc. 96 (2013) 3463-3469. https://doi.org/10.1111/jace.12498

J.H. Eom, Y.W. Kim, S. Raju, Processing and properties of macroporous silicon carbide ceramics: a review, J. Asian Ceram. Soc. 1 (2013) 220-242. https://doi.org/10.1016/j.jascer.2013.07.003

K.J. Kim, K.Y. Lim, Y.W. Kim, H.C. Kim, Temperature dependence of electrical resistivity (4-300 K) in aluminum- and boron-doped SiC ceramics, J. Am. Ceram. Soc. 96 (2013) 2525-2530. https://doi.org/10.1111/jace.12351

K.Y. Lim, Y.W. Kim, I.H. Song, Porous sodium borate-bonded SiC Ceramics, Ceram. Int. 39 (2013) 6827-6834. https://doi.org/10.1016/j.ceramint.2013.02.014

K.Y. Lim, Y.W. Kim, I.H. Song, Low-temperature processing of porous SiC ceramics, J. Mater. Sci. 48 (2013) 1973-1979. https://doi.org/10.4191/kcers.2006.43.9.552

J.H. Eom, Y.W. Kim, B.J. Jung, Effect of alkaline earth additives on the flexural strength of silicon oxycarbide-bonded silicon carbide ceramics, Ceram. Int. 39 (2013) 2083-2091. https://doi.org/10.1016/j.ceramint.2012.08.064

K.Y. Lim, Y.W. Kim, T. Nishimura, W.S. Seo, High temperature strength of silicon carbide sintered with 1 wt.% aluminum nitride and lutetium oxide, J. Eur. Ceram. Soc. 33 (2013) 345-350. https://doi.org/10.1016/j.jeurceramsoc.2012.09.005

Y.I. Lee, J.H. Eom, Y.W. Kim, I.H. Song, Effect of additive composition on flexural strength of cullet-loess tile bodies, J. Korean Ceram. Soc. 50 (2013) 416-422. https://doi.org/10.4191/kcers.2013.50.6.416

J.H. Eom, Y.W. Kim, I.H. Song, Processing of kaolin-based microfiltration membranes, J. Korean Ceram. Soc. 50 (2013) 341-347. https://doi.org/10.4191/kcers.2013.50.5.341

M.R. Youm, S.W. Park, Y.W. Kim, Effect of the C/Si molar ratio on the characteristics of β-SiC powders synthesized from TEOS and phenol resin, J. Korean Ceram. Soc. 50 (2013) 31-36. https://doi.org/10.4191/kcers.2013.50.1.31

Y.W. Kim, K.Y. Lim, K.J. Kim, Electrical resistivity of silicon carbide ceramics sintered with 1 wt% aluminum nitride and rare earth oxide, J. Eur. Ceram. Soc. 32 (2012) 4427-4434. https://doi.org/10.1016/j.jeurceramsoc.2012.07.021

K.J. Kim, K.Y. Lim, Y.W. Kim, Influence of Y2O3 addition on electrical properties of β-SiC ceramics sintered in nitrogen atmosphere, J. Eur. Ceram. Soc. 32 (2012) 4401-4406. https://doi.org/10.1016/j.jeurceramsoc.2012.07.001

I.H. Song, J.H. Ha, M.J. Park, H.D. Kim, Y.W. Kim, Effects of silicon particle size on microstructure and permeability of silicon-bonded SiC ceramics, J. Ceram. Soc. Jpn. 120 (2012) 370-374. https://doi.org/10.2109/jcersj2.120.370

J.H. Eom, Y.W. Kim, I.H. Song, Effects of the initial α-SiC content on the microstructure, mechanical properties, and permeability of macroporous silicon carbide ceramics, J. Eur. Ceram. Soc. 32 (2012) 1283-1290. https://doi.org/10.1016/j.jeurceramsoc.2011.11.040

K.J. Kim, Y.W. Kim, Fe doping and magnetic properties of zincblende SiC ceramics, J. Eur. Ceram. Soc. 32 (2012) 1149-1155. https://doi.org/10.1016/j.jeurceramsoc.2011.11.037

K.Y. Lim, Y.W. Kim, K.J. Kim, Influence of powder characteristics on the electrical resistivity of SiC ceramics, J. Ceram. Soc. Jpn. 120 (2012) 251-255. https://doi.org/10.2109/jcersj2.120.251

J.H. Eom, Y.W. Kim, C.B. Park, C. Wang, Effect of forming methods on porosity and compressive strength of polysiloxane-derived porous silicon carbide ceramics, J. Ceram. Soc. Jpn. 120 (2012) 199-203. https://doi.org/10.2109/jcersj2.120.199

J.H. Eom, Y.W. Kim, Effect of initial α-phase content on microstructure and flexural strength of macroporous silicon carbide ceramics, Met. Mater. Int. 18 (2012) 379-383. https://doi.org/10.1007/s12540-012-2025-3

J.H. Eom, Y.W. Kim, D.H. Jeong, S.S. Lee, Effect of additives on compressive strength and thermal conductivity of vermiculite-silica composites with layered structure, J. Ceram. Soc. Jpn. 120 (2012) 150-154. https://doi.org/10.2109/jcersj2.120.150

J.H. Eom, Y.W. Kim, I.H. Song, Effect of SiC filler content on microstructure and flexural strength of highly porous SiC ceramics fabricated from carbon-filled polysiloxane, J. Korean Ceram. Soc. 49 (2012 625-630. https://doi.org/10.4191/kcers.2012.49.6.625

J.H. Eom, Y.W. Kim, S.S. Lee, D.H. Jeong, Processing of vermiculite-silica composites with prefer-oriented rod-like pores, J. Korean Ceram. Soc. 49 (2012) 347-351. https://doi.org/10.4191/kcers.2012.49.4.347

K.Y. Lim, Y.W. Kim, K J. Kim, J.H. Yu, Effect of in situ-synthesized nano-size SiC addition on density and electrical resistivity of liquid-phase sintered silicon carbide ceramics, J. Ceram. Soc. Jpn. 119 (2011) 965-967. https://doi.org/10.2109/jcersj2.119.965

B.V. Manoj Kumar, Y.W. Kim, D.S. Lim, W.S. Seo, Influence of small amount of sintering additives on unlubricated sliding wear properties of SiC ceramics, Ceram. Int. 37 (2011) 3599-3608. https://doi.org/10.1016/j.ceramint.2011.06.018

K.J. Kim, K.Y. Lim, Y.W. Kim, Effective nitrogen doping for fabricating highly conductive β-SiC ceramics, J. Am. Ceram. Soc. 94 (2011) 3216-3219. https://doi.org/10.1111/j.1551-2916.2011.04799.x

G.P. Kennedy, K.Y. Lim, Y.W. Kim, I.H. Song, H.D. Kim, Effect of SiC particle size on flexural strength of porous self-bonded SiC ceramics, Met. Mater. Int. 17 (2011) 599-605. https://doi.org/10.1007/s12540-011-0811-y

B.V. Manoj Kumar, K.Y. Lim, Y.W. Kim, Influence of submicron SiC particle addition on porosity and flexural strength of porous self-bonded silicon carbide, Met. Mater. Int. 17 (2011) 435-440. https://doi.org/10.1007/s12540-011-0621-2

W. Zhai, Y.W. Kim, D.W. Jung, C.B. Park, Steam-chest molding of expanded polypropylene foams. 2. mechanism of interbead bonding, Ind. Eng. Chem. Res. 50 (2011) 5523-5531. https://doi.org/10.1021/ie101753w

B.V. Manoj Kumar, W. Zhai, J.H. Eom, Y.W. Kim, C.B. Park, Processing highly porous SiC ceramics using poly(ether-co-octene) and hollow microsphere templates, J. Mater. Sci. 46 (2011) 3664-3667. https://doi.org/10.1007/s10853-011-5284-3

B.V. Manoj Kumar, J.H. Eom, Y.W. Kim, I.H. Song, H.D. Kim, Effect of aluminum hydroxide content on porosity and strength of porous mullite-bonded silicon carbide ceramics, J. Ceram. Soc. Jpn. 119 (2011) 367-370. https://doi.org/10.2109/jcersj2.119.367

Y.W. Kim, K.J. Kim, H.C. Kim, N.H. Cho, K.Y. Lim, Electrodischarge-machinable silicon carbide ceramics sintered with yttrium nitrate, J. Am. Ceram. Soc. 94 (2011) 991-993. https://doi.org/10.1111/j.1551-2916.2011.04419.x

J.H. Eom, Y.W. Kim, D.H. Jeong, S.S. Lee, Thermal conductivity and compressive strength anisotropy in vermiculite-ceramic composites with layered structure, J. Ceram. Soc. Jpn. 119 (2011) 319-321. https://doi.org/10.2109/jcersj2.119.319

Y.W. Kim, J.H. Eom, Y. Guo, W. Zhai, C.B. Park, I.H. Song, Processing of open-cell silicon carbide foams by steam chest molding and carbothermal reduction, J. Am. Ceram. Soc. 94 (2011) 344-347. https://doi.org/10.1111/j.1551-2916.2010.04311.x

K.J. Kim, J.H. Eom, Y.W. Kim, Processing and structural characteristics of encapsulated ZnO in porous polysiloxane-derived ceramics, J. Ceram. Soc. Jap. 119 (2011) 136-139. https://doi.org/10.2109/jcersj2.119.136

B.V. Manoj Mumar, J.H. Eom, Y.W. Kim, Effect of filler addition on porosity and strength of polysiloxane-derived porous silicon carbide ceramics, J. Ceram. Soc. Jap. 119 (2011) 48-54. https://doi.org/10.2109/jcersj2.119.48

I.H. Song, E.J. Lee, H.D. Kim, Y.W. Kim, D.W. Yun, Investigation on the properties of a microcellular light-weighted humidity controlling tile, J. Korean Ceram. Soc. 48 (2011) 404-411. https://doi.org/10.4191/kcers.2011.48.5.404

K.Y. Lim, Y.W. Kim, I. H. Song, J.S. Bae, Flexural strength of macroporous silicon carbide ceramics, J. Korean Ceram. Soc. 48 (2011) 360-367. https://doi.org/10.4191/kcers.2011.48.5.360

M.H. Roh, W.J. Kim, Y.W. Kim, M.H. Choi, Effect of hot-forging on mechanical properties of silicon carbide sintered with Al2O3-Y2O3-MgO, Met. Mater. Int. 16 (2010) 891-894.https://doi.org/10.1007/s12540-010-1206-1

Y.H. Choi, Y.W. Kim, I.H. Han, S.K. Woo, Effect of alkaline earth metal oxide addition on flexural strength of porous mullite-bonded silicon carbide ceramics, J. Mater. Sci. 45 (2010) 6841-6844. https://doi.org/10.1007/s10853-010-4939-9

Y.W. Kim, J.H. Eom, C.B. Park, W. Zhai, Y. Guo, M. Balasubramanian, Processing of silicon oxycarbide foams by steam chest molding and pyrolysis, J. Am. Ceram. Soc. 93 (2010) 3099-3101. https://doi.org/10.1111/j.1551-2916.2010.04087.x

W.T. Zhai, Y.W. Kim, C.B. Park, Steam-chest molding of expanded polypropylene foams: 1. DSC simulation of bead foam processing, Ind. Eng. Chem. Res. 49 (2010) 9822-9829. https://doi.org/10.1021/ie101085s

J.H. Eom, Y.W. Kim, Low-temperature processing of silicon oxycarbide-bonded silicon carbide, J. Am. Ceram. Soc. 93 (2010) 2463-2466. https://doi.org/10.1111/j.1551-2916.2010.03812.x

B.V. Manoj Kumar, Y.W. Kim, Processing of polysiloxane-derived porous ceramics: a review, Sci. Technol. Adv. Mater. 11 (2010) 044303. https://doi.org/10.1088/1468-6996/11/4/044303

I.H. Song, I.M. Kwon, H.D. Kim, Y.W. Kim, Processing of microcellular silicon carbide ceramics with a duplex pore structure, J. Eur. Ceram. Soc. 30 (2010) 2671-2676. https://doi.org/10.1016/j.jeurceramsoc.2010.04.027

G.P. Kennedy, K.Y. Lim, Y.W. Kim, Effect of additive composition on porosity and flexural strength of porous self-bonded SiC ceramics, J. Ceram. Soc. Jpn. 118 (2010) 810-813. https://doi.org/10.2109/jcersj2.118.810

M. Narisawa, H. Kado, H. Mabuchi, Y.W. Kim, Accelerated ceramization of polymethylsilsesquioxane by aluminum-based filler reductant, Appl. Organometal. Chem. 24 (2010) 612-617. https://doi.org/10.1002/aoc.1554

J.H. Eom, Y.W. Kim, Effect of additives on mechanical properties of macroporous silicon carbide ceramics, Met. Mater. Int. 16 (2010) 399-405. https://doi.org/10.1007/s12540-010-0609-3

J.H. Eom, Y.W. Kim, M. Narisawa, Processing of porous silicon carbide with toughened strut microstructure, J. Ceram. Soc. Jap. 118 (2010) 380-383. https://doi.org/10.2109/jcersj2.118.380

Y.W. Kim, Y.J. Jin, J.H. Eom, I.H. Song, H.D. Kim, Engineering porosity in silicon carbide ceramics, J. Mater Sci. 45 (2010) 2808-2815. https://doi.org/10.1007/s10853-010-4270-5

B.V. Manoj Kumar, M.H. Roh, Y.W. Kim, W.J. Kim, S.W. Park, Mechanical properties of SiC ceramics sintered with RE2O3 (RE: Sc, Lu, Y) and AlN additives, Met. Mater. Int. 16 (2010) 229-233. https://doi.org/10.1007/s/12540-010-0411-2

J.H. Eom, Y.W. Kim, K.J. Kim, Suppression of free Si formation during liquid phase sintering of polysiloxane-derived, porous silicon carbide ceramics, J. Ceram. Soc. Jpn. 118 (2010) 102-106. https://doi.org/10.2109/jcersj2.118.102

Y.J. Jin, Y.W. Kim, Low temperature processing of highly porous silicon carbide ceramics with improved flexural strength, J. Mater. Sci. 45 (2010) 282-285. https://doi.org/10.1007/s10853-009-3993-7

B.V. Manoj Kumar, J.H. Eom, Y.W. Kim, I. S. Han, S. K. Woo, Effect of aluminum source on flexural strength of mullite-bonded porous silicon carbide ceramics, J. Ceram. Soc. Jpn. 118 (2010) 13-18. https://doi.org/10.2109/jcersj2.118.13

I.H. Song, M.J. Park, H.D. Kim, Y.W. Kim, J.S. Bae, Microstructure and permeability property of Si bonded porous SiC with variations in the carbon content, J. Korean Ceram. Soc. 47 (2010) 546-552. https://doi.org/10.4191/kcers.2010.47.6.546

K.Y. Lim, Y.W. Kim, I. H. Song, H.D. Kim, J.S. Bae, Effect of frit content on microstructure and flexural strength of porous frit-bonded Al2O3 ceramics, J. Korean Ceram. Soc. 47 (2010) 529-533. https://doi.org/10.4191/kcers.2010.47.6.529

I.S. Han, D.W. Seo, S. Kim, K. S. Hong, S.K. Woo, Y.W. Kim, Fabrication and properties of SiC candle filter by vacuum extrusion and ramming process (II), J. Korean Ceram. Soc. 47 (2010) 515-523. https://doi.org/10.4191/KCERS.2010.47.6.515

Y.H. Choi, Y.W. Kim, S.K. Woo, I.S. Han, Effect of template content on microstructure and flexural strength of porous mullite-bonded silicon carbide ceramics, J. Korean Ceram. Soc. 47 (2010) 509-514. https://doi.org/10.4191/kcers.2010.47.6.509

Y.H. Choi, Y.W. Kim, S.K. Woo, I.S. Han, Effect of starting SiC particle size on nitridation and strength of silicon nitride-bonded silicon carbide ceramics, J. Korean Ceram. Soc. 47 (2010) 157-162. https://doi.org/10.4191/KCERS.2010.47.2.157

M.H. Roh, Y.W. Kim, W.J. Kim, T. Nishimura, W.S. Seo, S.H. Ko, S.J. Lee, Effect of aluminum nitride-scandia content on the microstructural and mechanical properties of sintered silicon carbide ceramics, Met. Mater. Int. 15 (2009) 937-941. https://doi.org/10.1007/S12540-009-0937-3

J.H. Eom, Y.W. Kim, S.K. Woo, Effect of alumina content on flexural strength of porous mullite-bonded silicon carbide ceramics, J. Ceram. Process. Res. 10 (2009) s82-s86.

M. Narisawa, R.I. Sumimoto, K.I. Kita, H. Kado, H. Mabuchi, Y.W. Kim, Melt spinning and metal chloride vapor curing process on polymethylsilsesquioxane as Si-O-C fiber precursor, J. Appl. Polym. Sci. 114 (2009) 2600-2607. https://doi.org/10.1002/app.30802

B.V. Manoj Kumar, M.H. Roh, Y.W. Kim, W.J. Kim, S.W. Park, W.S. Seo, Effect of additive composition on microstructure and mechanical properties of SiC ceramics sintered with small amount of RE2O3 (RE: Sc, Lu, Y) and AlN, J. Mater Sci. 44 (2009) 5939-5943. https://doi.org/10.1007/s10853-009-3818-8

S.H. Chae, Y.W. Kim, I.H. Song, H.D. Kim, M. Narisawa, Porosity control of porous silicon carbide ceramics, J. Eur. Ceram. Soc. 29 (2009) 2867-2872. https://doi.org/10.1016/j.jeurceramsoc.2009.03.027

J.H. Eom, Y.W. Kim, Effect of additive composition on microstructure and strength of porous silicon carbide ceramics, J. Mater Sci. 44 (2009) 4482-4486. https://doi.org/10.1007/s10853-009-3638-x

C. Wang, J. Wang, C.B. Park, Y.W. Kim, Processing of porous silicon oxycarbide ceramics from extruded blends of polysiloxane and low-density polyethylene, J. Ceram. Proc. Res. 10 (2009) 238-242. http://doi.org/10.36410/jcpr.2009.10.2.238

J.H. Eom, Y.W. Kim, S.K. Woo, I.S. Han, Effect of submicron silicon carbide powder addition on the processing and strength of reaction-sintered mullite-silicon carbide composites, J. Ceram. Soc. Jpn. 117 (2009) 421-425. https://doi.org/10.2109/jcersj2.117.421

C. Wang, J. Wang, C. B. Park, Y.W. Kim, Fabrication of porous ceramics from polysiloxane-metallocene polyethylene blends with carbon dioxide, J. Ceram. Proc. Res. 10 (2009) 66-72. http://doi.org/10.36410/jcpr.2009.10.1.66

R.H. Ryu, K.S. Lee, Y.W. Kim, Indentation and contact damages on grain boundary controlled silicon carbide ceramics, J. Mater. Sci. 44 (2009) 1416-1420. https://doi.org/10.1007/s/10853-009-3255-8

K.J. Kim, S. Lee, J.H. Lee, M.H. Roh, K.Y. Lim, Y.W. Kim, Structural and optical characteristics of crystalline silicon carbide nanoparticles synthesized by carbothermal reduction, J. Am. Ceram. Soc. 92 (2009) 424-428. https://doi.org/10.1111/j.1551-2916.2008.02913.x

S.H. Chae, Y.W. Kim, Effect of inert filler addition on microstructure and strength of porous SiC ceramics, J. Mater. Sci. 44 (2009) 1404-1406. https://doi.org/10.1007/s10853-009-3264-7

S.H. Ko, S.J. Lee, M.H. Roh, W.J. Kim, Y.W. Kim, Effect of annealing on mechanical properties of silicon carbide sintered with aluminum nitride and scandium oxide, Met. Mater. Int. 15 (2009) 149-153. https://doi.org/10.1007/s12540-009-0149-x

M.K. Shin, I.S. Han, D.W. Seo, S. Kim, S.K. Woo, S.W. Lee, Y.W. Kim, Fabrication and properties of the SiC candle filter by vacuum extrusion and ramming process, J. Korean Ceram. Soc. 46 (2009) 662-667. https://doi.org/10.4191/kcers.2009.46.6.662

K.Y. Lim, Y.W. Kim, S.K. Woo, I.S. Han, Effect of aluminum addition on porosity and flexural strength of porous self-bonded silicon carbide ceramics, J. Korean Ceram. Soc. 46 (2009) 520-524. https://doi.org/10.4191/KCERS.2009.46.5.520

S.H. Chae, Y.W. Kim, I.H. Song, H.D. Kim, J.S. Bae, S.M. Na, S.I. Kim, Low temperature processing and properties of porous frit-bonded SiC ceramics, J. Korean Ceram. Soc. 46 (2009) 488-492. https://doi.org/10.4191/KCERS.2009.46.5.488

E.J. Lee, I.H. Song, H.D. Kim, Y.W. Kim, J.S. Bae, Investigation on the pore properties of the microcellular ZrO2 ceramics using hollow microsphere, J. Korean Ceram. Soc. 46 (2009) 108-115. https://doi.org/10.4191/KCERS.2009.46.1.108

S.H. Chae, Y.W. Kim, I.H. Song, H.D. Kim, J.S. Bae, Effects of template size and content on porosity and strength of macroporous zirconia ceramics, J. Korean Ceram. Soc. 46 (2009) 35-40. https://doi.org/10.4191/KCERS.2009.46.1.035

K.Y. Lim, D.H. Jang, Y.W. Kim, J.Y. Park, D.S. Park, Fabrication of dense 2D SiC matrix composites by slurry infiltration and a stacking process, Met. Mater. Int. 14 (2008) 589-591. https://doi.org/10.3365/met.mat.2008.10.589

J.H. Eom, Y.W. Kim, Effect of template size on microstructure and strength of porous silicon carbide ceramics, J. Ceram. Soc. Jpn. 116 (2008) 1159-1163. https://doi.org/10.2109/jcersj2.116.1159

J.H. Eom, Y.W. Kim, M. Narisawa, Microstructural development of macroporous silicon carbide ceramics during annealing, J. Ceram. Process. Res. 9 (2008) 176-179.

Y.W. Kim, J.H. Eom, C. Wang, C.B. Park, Processing of porous silicon carbide ceramics from carbon-filled polysiloxane by extrusion and carbothermal reduction, J. Am. Ceram. Soc. 91 (2008) 1361-1364. https://doi.org/10.1111/j.1551-2916.2008.02280.x

J.H. Eom, Y.W. Kim, I.H. Song, H.D. Kim, Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates, J. Eur. Ceram. Soc. 28 (2008) 1029-1035. https://doi.org/10.1016/j.jeurceramsoc.2007.09.009

M. Narisawa, H. Yasuda, R. Mori, H. Mabuchi, K. Oka, Y.W. Kim, Silicon carbide particle formation from carbon black polymethylsilsesquioxane mixtures with melt pressing, J. Ceram. Soc. Jpn. 116 (2008) 121-125. https://doi.org/10.2109/jcersj2.116.121

K.Y. Lim, Y.W. Kim, S.K. Woo, I.S. Han, Effect of carbon source on porosity and flexural strength of porous self-bonded silicon carbide ceramics, J. Korean Ceram. Soc. 45 (2008) 430-437. https://doi.org/10.4191/kcers.2008.45.7.430

J149.

K.Y. Lim, Y.W. Kim, S.K. Woo, and I.S. Han, "Effect of Carbon Source on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics, J. Korean Ceram. Soc., 45 [7] 430-437 (2008)."

J148.

K.Y. Lim, Y.W. Kim, and J.Y. Park, "Fabrication of SiC Fiber-SiC Matrix Composites by Reaction Sintering, J. Korean Ceram. Soc., 45 [4] 204-207 (2008)."

J147.

S.H. Chae, J. H. Eom, Y.W. Kim, I.H. Song, H.D. Kim, J. S. Bae, S. M. Na, and S. I. Kim, "Porosity Control of Porous Zirconia Ceramics, J. Korean Ceram. Soc., 45 [1] 65-68 (2008)."

J146.

J.H. Eom and Y.W. Kim, "Fabrication of Silicon Oxycarbide Foams from Extruded Blends of Polysiloxane, Low-Density Polyethylene (LDPE), and Polymer Microbead, Met. Mater. Int., 13 [6] 521-525 (2007). "

J145.

Y.W. Kim, C. Wang, and C.B. Park, "Processing of Porous Silicon Oxycarbide Ceramics from Extruded Blends of Polysiloxane and Polymer Microbead, J. Ceram. Soc. Jpn., 115 [7] 419-424 (2007). "

J144.

C. Wang, J. Wang, C.B. Park, and Y.W. Kim, "Fabrication of Cellular and Microcellular Ceramics with Controllable Open-Cell Content from Polysiloxane-LDPE Blends: I. Compounding and Foaming, J. Mater. Sci., 42 [8] 2854-2861 (2007). "

J143.

J.H. Eom, Y.W. Kim, I.H. Song, and H.D. Kim, "Microstructure and Properties of Porous Silicon Carbide Ceramics Fabricated by Carbothermal Reduction and Subsequent Sintering Process,” Mater. Sci. Eng. A 464, 129-134 (2007). "

J142.

Y.W. Kim, Y.S. Chun, J.Y. Park, W.S. Ryu, and D.S. Park, "Process for Dense 2D SiC Fiber-SiC Matrix Composites, Met. Mater. Int., 13 [3] 197-200 (2007). "

J141.

S.M. Lee, T.W. Kim, H.J. Lim, C. Kim, Y.W. Kim, and K.S. Lee, "Mechanical Properties and Contact Damages of Nanostructured Silicon Carbide Ceramics, J. Ceram. Soc. Jpn., 115 [5] 304-309 (2007)."

J140.

D.H. Jang, Y.W. Kim, and H.D. Kim, "Processing of Porous Cordierite Ceramics with Controlled Porosity, J. Ceram. Soc. Jpn., 115 [1] 52-58 (2007). "

J139.

Y.W. Kim, Y.S. Chun, T. Nishimura, M. Mitomo, and Y.H. Lee, "High-Temperature Strength of Silicon Carbide Ceramics Sintered with Rare-Earth Oxide and Aluminum Nitride, Acta Mater., 55 [2] 727-736 (2007)."

J138.

K.Y. Lim, D.H. Jang, Y.W. Kim, J.Y. Park, and D.S. Park, "Effect of the Processing Parameters on the Densification and Strength of 2D SiC Fiber-SiC Matrix Composites Fabricated by Slurry Infiltration and Stacking Process, J. Korean Ceram. Soc., 44 [7] 349-353 (2007)."

J137.

I.H. Song, Y.M. Kim, H.D. Kim, and Y.W. Kim, "Synthesis of Microcellular Cordierite Ceramics Derived from a Preceramic Polymer, J. Korean Ceram. Soc., 44 [5] 184-189 (2007)."

J136.

D.H. Jang, K.Y. Lim, and Y.W. Kim, "Effects of Additive Composition and Content on Sintered Density and Compressive Strength of Cordierite Ceramics, J. Korean Ceram. Soc., 44 [4] 230-234 (2007)."

J135.

Y.I. Lee and Y.W. Kim, "Effect of Additive Composition on Fracture Toughness of In Situ-Toughened SiC-Si3N4 Composites, J. Korean Ceram. Soc., 44 [4] 189-193 (2007)."

J134.

Y.W. Kim, Y.I. Lee, and M. Mitomo, "Sinterability of Nano-Sized Silicon Carbide Powders, J. Ceram. Soc. Jpn., 114 [8] 681-685 (2006). "

J133.

D.H. Jang, Y.W. Kim, I.H. Song, and H.D. Kim, "Processing of Cellular Glasses Using Glass Microspheres, J. Am. Ceram. Soc., 89 [10] 3262-3265 (2006). "

J132.

D.H. Jang, Y.W. Kim, I.H. Song, H.D. Kim, and C.B. Park, "Processing of Highly Porous, Open-Cell, Microcellular Silicon Carbide Ceramics by Expansion Method Using Expandable Microspheres, J. Ceram. Soc. Jpn., 114 [6] 549-553 (2006). "

J131.

I.H. Song, M.J. Kim, H.D. Kim, and Y.W. Kim, "Processing of Microcellular Cordierite Ceramics from a Preceramic Polymer, Scripta Mater., 54 [4] 1521-1525 (2006). "

J130.

J.H. Lee, D.Y. Kim, and Y.W. Kim, "Grain Boundary Crystallization During Furnace Cooling of ?-SiC Sintered with Y2O3-Al2O3-CaO, J. Eur. Ceram. Soc., 26, 1267-1272 (2006). "

J129.

H.D. Kim, Y.J. Park, B.D. Han, M.W. Park, W.T. Bae, Y.W. Kim, H.T. Lin, and P.F. Becher, "Fabrication of Dense Bulk Nano-Si3N4 Ceramics without Secondary Crystalline Phase, Scripta Mater., 54 [4] 615-619 (2006). "

J128.

J.H. Eom, D.H. Jang, Y.W. Kim, I.H. Song, and H.D. Kim, "Low Temperature Processing of Porous Silicon Carbide Ceramics by Carbothermal Reduction, J. Korean Ceram. Soc., 43 [9] 552-557 (2006)."

J127.

S.H. Lee and Y.W. Kim, "Processing of Cellular SiC Ceramics Using Polymer Microbeads, J. Korean Ceram. Soc., 43 [8] 458-462 (2006)."

J126.

Y.S. Chun and Y.W. Kim, "Processing of Silica-Bonded Silicon Carbide Ceramics, J. Korean Ceram. Soc., 43 [6] 327-332 (2006)."

J125.

S.K. Lee, K. Ando, and Y.W. Kim, "Effect of Heat Treatments on the Crack-Healing and Static Fatigue of Silicon Carbide Sintered with Sc2O3 and AlN, J. Am. Ceram. Soc., 88 [12], 3478-3482 (2005)."

J124.

Y.W. Kim, H.D. Kim, and C.B. Park, "Processing of Microcellular Mullite, J. Am. Ceram. Soc., 88 [12] 3311-3315 (2005)."

J123.

Y.W. Kim, S.H. Kim, I.H. Song, H.D. Kim, and C.B. Park, "Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction, J. Am. Ceram. Soc., 88 [10] 2949-2951 (2005)."

J122.

Y.S. Chun and Y.W. Kim, "Processing and Mechanical Properties of Porous Silica-Bonded Silicon Carbide Ceramics, Met. Mater. Int., 11 [5] 351-355 (2005)."

J121.

Y.W. Kim, S.H. Lee, T. Nishimura, and M. Mitomo, "Heat-Resistant Silicon Carbide with Aluminum Nitride and Scandium Oxide, Acta Mater., 53 [17] 4701-4708 (2005)."

J120.

Y.W. Kim, Y.J. Jin, Y.S. Chun, I.H. Song, and H.D. Kim, "A Simple Pressing Route to Closed-Cell Microcellular Ceramics, Scripta Mater., 53 [8] 921-925 (2005)."

J119.

Y.M. Ko, W.T. Kwon, and Y.W. Kim, "Cutting Performance of Al2O3-SiC Nanocomposite Tools, J. Mater. Sci., 40 [2] 785-787 (2005)."

J118.

S.H. Lee, Y.I. Lee, Y.W. Kim, R.J. Xie, M. Mitomo, and G.D. Zhan, "Mechanical Properties of Hot-Forged Silicon Carbide Ceramics, Scripta Mater., 52, 153-156 (2005)."

J117.

Y.S. Chun and Y.W. Kim, "Possible Strategies for Microstructure Control of Liquid-Phase-Sintered Silicon Carbide Ceramics, J. Korean Ceram. Soc., 42 [8] 542-547 (2005)."

J116.

S.H. Lee and Y.W. Kim, "Effect of Additive Composition on Mechanical Properties of SiC Sintered with AlN and Er2O3, J. Korean Ceram. Soc., 42 [1] 16-21 (2005)."

J115.

Y.M. Ko, W.T. Kwon, and Y.W. Kim, "Development of Al2O3-SiC Composite Tool for Machining Application, Ceram. Int., 30 [8] 2081-2086 (2004)."

J114.

H.J. Choi and Y.W. Kim, "Intergranular Film Thickness of Self-Reinforced Silicon Carbide Ceramics, J. Eur. Ceram. Soc., 24, 3795-3800 (2004). "

J113.

Y.W. Kim, S.H. Kim, H.D. Kim, and C.B. Park, "Processing of Closed-Cell Silicon Oxycarbide Foams from a Preceramic Polymer, J. Mater. Sci., 39, 5647-5652 (2004)."

J112.

C. Wang, J. Wang, C.B. Park, and Y.W. Kim, "Cross-linking Behavior of a Polysiloxane in Preceramic Foam Processing, J. Mater. Sci., 39, 4913-4915 (2004)."

J111.

Y.I. Lee, Y.W. Kim, and M. Mitomo, "Effect of Processing on Densification of Nanostructured SiC Ceramics Fabricated by Two-Step Sintering, J. Mater. Sci., 39 [11] 3801-3803 (2004). "

J110.

Y.I. Lee, Y.W. Kim, and M. Mitomo, "Microstructure Stability of Fine-Grained Silicon Carbide Ceramics During Annealing, J. Mater. Sci., 39 [11] 3613-3617 (2004). "

J109.

S.H. Kim, Y.W. Kim, and C.B. Park, "Effect of Inert Filler Addition on Pore Size and Porosity of Closed-cell Silicon Oxycarbide Foams, J. Mater. Sci., 39 [10] 3513-3515 (2004)."

J108.

H.J. Choi, Y.W. Kim, M. Mitomo, T. Nishimura, J. H. Lee, and D.Y. Kim, "Intergranular Glassy Phase Free SiC Ceramics Retains Strength at 1500oC, Scripta Mater., 50 [9] 1203-1207 (2004)."

J107.

Y.I. Lee and Y.W. Kim, "Toughening Mechanism in SiC-TiC Composites, J. Ceram. Soc. Jpn, 112 [1] 18-21 (2004)."

J106.

S.H. Kim, Y.W. Kim, J.Y. Yun, and H.D. Kim, "Fabrication of Porous SiC Ceramics by Partial Sintering and Their Properties, J. Korean Ceram. Soc., 41 [7] 541-547 (2004)."

J105.

W.T. Kwon and Y.W. Kim, "Cutting Performance of Si3N4 Based SiC Ceramic Cutting Tool, KSME Int. J. 18 [3] 388-394 (2004)."

J104.

Y.W. Kim, S.H. Kim, C. Wang, C.B. Park, "Fabrication of Microcellular Ceramics Using Gaseous Carbon Dioxide, J. Am. Ceram. Soc., 86 [12] 2231-2233 (2003)."

J103.

Y.W. Kim and C.B. Park, "Processing of Microcellular Preceramics Using Carbon Dioxide, Comp. Sci. & Tech., 63, 2371-2377 (2003)."

J102.

Y.W. Kim, K.H. Lee, S.H. Lee, and C.B. Park, "Fabrication of Porous Silicon Oxycarbide Ceramics by Foaming Polymer Liquid and Compression Molding, J. Ceram. Soc. Jpn, 111 [11] 863-864 (2003)."

J101

Y.I. Lee, Y.W. Kim, M. Mitomo, and D.Y. Kim, "Fabrication of Dense Nanostructured Silicon Carbide Ceramics Through Two-Step Sintering, J. Am. Ceram. Soc., 86 [10] 1803-1805 (2003). "

J100.

B.C. Bae, D.S. Park, W.J. Kim, Y.W. Kim, B.-D. Han, H.D. Kim, C. Park, "Texture in Silicon Nitride Seeded with Silicon Nitride Whiskers of Different Sizes, J. Am. Ceram. Soc., 86 [6] 1008-1013 (2003)."

J99.

S.H. Kim, Y.W. Kim, and M. Mitomo, "Microstructure and Fracture Toughness of Liquid-Phase-Sintered ?-SiC Containing ?-SiC Whiskers as Seeds, J. Mater. Sci., 38, 1117-1121 (2003)."

J98.

Y.W. Kim, K. Ando, and M.C. Chu, "Crack Healing Behavior of Liquid-Phase-Sintered Silicon Carbide Ceramics, J. Am. Ceram. Soc., 86 [3] 465-470 (2003)."

J97.

Y.W. Kim and Y.I. Lee, "Microstructure and Fracture Toughness of In-Situ-Toughened SiC Composites, Int. J. Mater. & Product Tech., 18 [1-3] 199-214 (2003)."

J96.

Y.I. Lee and Y.W. Kim, "Microstructure and Mechanical Properties of SiC-BN Composites with Oxynitride Glass, J. Korean Ceram. Soc., 40 [3] 229-233 (2003). "

J95.

Y.W. Kim, S.H. Kim, X. Xu, C.H. Choi, C.B. Park, H.D. Kim, "Fabrication of Porous Preceramic Polymers Using Carbon Dioxide, J. Mater. Sci. Lett., 22, 1667-1669 (2002)."

J94.

H.J. Choi, J.G. Lee, and Y.W. Kim, "Oxidation Behavior of Liquid-Phase-Sintered Silicon Carbide with Aluminum Nitride and Rare-Earth Oxides (Re2O3 where Re=Y, Er, Yb), J. Am. Ceram. Soc., 85 [9] 2281-2286 (2002)."

J93.

Y.J. Jin, Y.W. Kim, M. Mitomo, "Effect of Large Seeds Addition on Microstructural Development of SiC Sintered with Oxynitride Glass, J. Mater. Sci. Lett., 21, 1015-1017 (2002)."

J92.

H.G. An, Y.W. Kim, and S. Kang, "Microstructure and Fracture Toughness of Liquid-Phase-Sintered SiC-Ti(CN) Composites, J. Mater. Sci. Lett., 21, 883-886 (2002)."

J91.

Y.I. Lee and Y.W. Kim, "Process-Tolerant SiC-TiC Composites, J. Mater. Sci. Lett., 21, 863-866 (2002)."

J90.

Y.W. Kim, S.G. Lee, and M. Mitomo, "Microstructural Development of Liquid-Phase-Sintered Silicon Carbide During Annealing with Uniaxial Pressure, J. Eur. Ceram. Soc., 22, 1031-1037 (2002)."

J89.

Y.W. Kim, M. Mitomo, and T. Nishimura, "High-Temperature Strength of Liquid-Phase-Sintered SiC with AlN and Re2O3 (Re=Y, Yb), J. Am. Ceram. Soc., 85 [4] 1007-1009 (2002)."

J88.

T. Nagano, K. Kaneko, G.D. Zhan, M. Mitomo, and Y.W. Kim, "Superplastic Behavior of Liquid-Phase-Sintered ?-SiC Prepared with Oxynitride Glass in an N2 Atmosphere, J. Eur. Ceram. Soc., 22, 263-270 (2002)."

J87.

R.J. Xie, M. Mitomo, W. Kim, Y.W. Kim, G.D. Zhan, and Y. Akimune, "Phase Transformation and Texture in Hot-Forged or Annealed Liquid-Phase-Sintered Silicon Carbide Ceramics, J. Am. Ceram. Soc., 85 [2] 459-465 (2002)."

J86.

Y.W. Kim, M. Mitomo, and G.D. Zhan, "Microstructure Control of Liquid-Phase-Sintered ?-SiC by Seeding, J. Mater. Sci. Lett., 20, 2217-2220 (2001)."

J85.

Y.W. Kim, M. Mitomo, and T. Nishimura, "Heat-Resistant Silicon Carbide with Aluminum Nitride and Erbium Oxide, J. Am. Ceram. Soc., 84 [9] 2060-2064 (2001)."

J84.

G.D. Zhan, M. Mitomo, Y.W. Kim, R.J. Xie, and A. K. Mukherjee, "Transmission Electron Microscopy Observation in a Liquid-Phase-Sintered SiC with Oxynitride Glass, J. Mater. Res., 16 [8] 2189-2191 (2001)."

J83.

S.G. Lee, Y.W. Kim, and M. Mitomo, "Relationship between Microstructure and Fracture Toughness of Toughened Silicon Carbide Ceramics, J. Am. Ceram. Soc., 84 [6] 1347-1353 (2001)."

J82.

G.D. Zhan, R.J. Xie, M. Mitomo, and Y.W. Kim, "Effect of ?-to-? Phase Transformation on the Microstructural Development and Mechanical Properties of Fine-Grained Silicon Carbide Ceramics, J. Am. Ceram. Soc., 84 [5] 945-950 (2001)."

J81.

K.S. Cho, H.J. Choi, J.G. Lee, and Y.W. Kim, "R-curve Behaviour of Layered Silicon Carbide Ceramics with Surface Fine Microstructure, J. Mater. Sci., 36, 2189-2193 (2001)."

J80.

H.J. Choi, H.J. Kim, J.G. Lee, and Y.W. Kim, "Slow Crack Growth Behavior in Si3N4 sintered with Yb2Si2O7 Tie-Line Composition Additives, J. Eur. Ceram. Soc., 21, 471-475 (2001)."

J79.

R.J. Xie, G.D. Zhan, M. Mitomo, W. Kim, and Y.W. Kim, "Preferred Orientation of Beta-Phase and Its Mechanisms In A Fine-Grained Silicon Nitride-Based Ceramic, J. Mater. Res., 16 [2] 590-596 (2001)."

J78.

S.G. Lee, W.H. Shim, J.Y. Kim, Y.W. Kim, and W.T. Kwon, "Effect of Sintering-Additive Composition of Fracture Toughness of Liquid-Phase-Sintered SiC Ceramics, J. Mater. Sci. Lett., 20, 143-146 (2001)."

J77.

Y.I. Lee, Y.W. Kim, H.J. Choi, and J.G. Lee, "Effects of Additive Amount on Microstructure and Mechanical Properties of silicon Carbide-Silicon Nitride Composites, J. Mater. Sci., 36, 699-702 (2001)."

J76.

H.G. An, Y.W. Kim, and J.G. Lee, "Effect of Initial ?-Phase Content of SiC on Microstructure and Mechanical Properties of SiC-TiC Composites, J. Eur. Ceram. Soc., 21, 93-98 (2001)."

J75.

H.G. An and Y.W. Kim, "R-Curve Behavior of Silicon Carbide-Titanium Carbide Composites, J. Korean Ceram. Soc., 38 [12] 1075-1079 (2001)."

J74.

W.T. Kwon and Y.W. Kim, "Microstructure and Cutting Characteristics of SiC-Si3N4 Ceramic Cutting Tool, J. Korean Mech. Soc. A, 25 [12] 1944-1949 (2001)."

J73.

K.J. Kim, J.S. Park, S.K. Lee, W.T. Kwon, and Y.W. Kim, "Optimization of the Sintering Time and Composition for SiC-Si3N4 Ceramic Tool, Trans. Korean Soc. Mach. Tool Eng., 10 [6] 78-84 (2001)."

J72.

J.S. Park, K.J. Kim, W.T. Kwon, and Y.W. Kim, "Cutting Characteristics of SiC-Based Ceramic Cutting Tools- Part 2: Tool Life and Cutting Force Characteristics of SiC-Based Ceramic Cutting Tools, J. Korean Soc. Precision Eng., 18 [9] 89-95 (2001)."

J71.

J.S. Park, K.J. Kim, W.H. Shim, W.T. Kwon, and Y.W. Kim, "Cutting Characteristics of SiC-Based Ceramic Cutting Tools- Part 1: Microstructure and Mechanical Properties of SiC-Based Ceramic Cutting Tools, J. Korean Soc. Precision Eng., 18 [9] 82-88 (2001). "

J70.

Y.I. Lee, Y.W. Kim, H.J. Choi, and J.G. Lee, "Mechanical Properties of SiC-Si3N4 Composites Containing ?-Si3N4 Seeds, J. Korean Ceram. Soc., 38 [1] 22-27 (2001)."

J69.

R.J. Xie, M. Mitomo, W. Kim, and Y.W. Kim, "Texture Development in Silicon Nitride-Silicon Oxynitride In Situ Composites via Superplastic Deformation, J. Am. Ceram. Soc., 83 [12] 3147-3152 (2000)."

J68.

H.J. Choi, G.H. Kim, J.G. Lee and Y.W. Kim, Refined Continuum Model on the Behavior of Intergranular Films in Silicon Nitride Ceramics, J. Am. Ceram. Soc., 83 [11] 2821-2827 (2000)."

J67.

Y.W. Kim and M. Mitomo, "Fabrication and Mechanical Properties of Silicon Carbide-Silicon Nitride Nanocomposites, J. Mater. Sci., 35, 5885-5890 (2000)."

J66.

Y.W. Kim, S.G. Lee, and Y.I. Lee, "Pressureless Sintering of SiC-TiC Composites with Improved Fracture Toughness, J. Mater. Sci., 35, 5569-5574 (2000)."

J65.

H.G. An and Y.W. Kim, "Effect of Sintering-Additive Composition on Fracture Toughness of In Situ-Toughened SiC-30 wt% TiC Composites, J. Mater. Sci. Lett., 19, 2131-2133 (2000)."

J64.

J.Y. Kim, H.G. An, Y.W. Kim, and M. Mitomo, "R-curve behaviour and microstructure of liquid-phase sintered alpha-SiC, J. Mater. Sci., 33, 3693-3697 (2000)."

J63.

G.D. Zhan, M. Mitomo, H. Tanaka, and Y.W. Kim, "Effect of Annealing Conditions on Microstructural Development and Phase Transformation in Silicon Carbide, J. Am. Ceram. Soc., 83 [6] 1369-1374 (2000)."

J62.

Y.W. Kim, J.Y. Kim, S.H. Rhee, and D.Y. Kim, "Effect of Initial Particle Size on Microstructure of Liquid-Phase-Sintered α-Silicon Carbide, J. Eur. Ceram. Soc., 20, 945-949 (2000)."

J61.

M.J. Kim, Y.W. Kim, W. Kim, H.J. Lim, and D.H. Cho, "Effect of Additive Amount on Microstructure and Fracture Toughness of SiC-TiC Composites, Korean J. Ceram., 6 [2] 91-95 (2000). "

J60.

C.H. Choi, C.S. Lee, K.J. Park, D.H. Cho, and Y.W. Kim, "Mechanical Properties of Hot-Pressed SiC with Rare-Earth Oxide, J. Korean Ceram. Soc., 37 [2] 158-163 (2000). "

J59.

Y.W. Kim, M. Mitomo, and G.D. Zhan, "Mechanism of Grain Growth in Liquid-Phase-Sintered ?-SiC, J. Mater. Res., 14 [11] 4291-4293 (1999)."

J58.

G.D. Zhan, M. Mitomo, and Y.W. Kim, "Microstructural Control for Strengthening of Silicon Carbide Ceramics, J. Am. Ceram. Soc., 82 [10] 2924-2926 (1999)."

J57.

Y.W. Kim and M. Mitomo, "Fine-Grained Silicon Carbide Ceramics with Oxynitride Glass, J. Am. Ceram. Soc., 82 [10] 2731-2736 (1999)."

J56.

H.J. Choi, J.G. Lee, and Y.W. Kim, "Oxidation Behavior of Hot-Pressed Si3N4 with Re2O3 (Re = Y, Yb, Er, La), J. Eur. Ceram. Soc. 19, 2757-2762 (1999)."

J55.

J.Y. Kim, Y.W. Kim, J.G. Lee, and K.S. Cho, "Effect of Annealing on Mechanical Properties of Self-Reinforced Alpha-Silicon Carbide, J. Mater. Sci., 34, 2325-2330 (1999)."

J54.

Y.W. Kim, Y.I. Lee, M. Mitomo, H.J. Choi, and J.G. Lee, "Fabrication and Mechanical Properties of Silicon Carbide-Silicon Nitride Composites with Oxynitride Glass, J. Am. Ceram. Soc., 82 [4] 1058-1060 (1999)."

J53.

J.Y. Kim, Y.W. Kim, M. Mitomo, G.D. Zhan, and J.G. Lee, "Microstructure and Mechanical Properties of ?-Silicon Carbide Sintered with Yttrium-Aluminum Garnet and Silica, J. Am. Ceram. Soc., 82 [2] 441-444 (1999)."

J52.

Y.I. Lee, Y.W. Kim, H.J. Choi, and J.G. Lee, "Mechanical Properties of Silicon Carbide-Silicon Nitride Composites Sintered with Yttrium Aluminum Garnet, J. Korean Ceram. Soc., 36 [8] 799-804 (1999)."

J51.

H.J. Choi, J.G. Lee, Y.W. Kim, and K.S. Cho, "High Temperature Properties of Si3N4-Re Silicon Oxynitride (Re=Y, Tb, Er, La) Ceramics, Korean J. Ceram., 5[3] 211-216 (1999)."

J50.

Y.W. Kim, M. Mitomo, H. Emoto, and J.G. Lee, "Effect of Initial ?-Phase Content on Microstructure and Mechanical Properties of Sintered Silicon Carbide, J. Am. Ceram. Soc., 81 [12] 3136-3140 (1998)."

J49.

K.S. Cho, H.J. Choi, J.G. Lee, and Y.W. Kim, "Microstructure and Fracture Toughness of In-Situ Toughened SiC-TiC Composites, J. Mater. Sci. Lett., 17, 1081-1084 (1998)."

J48.

W. Kim, Y.W. Kim, and D.H. Cho, "Texture and Fracture Toughness Anisotropy in Silicon Carbide, J. Am. Ceram. Soc., 81 [6] 1669-1672 (1998)."

J47.

C.S. Lee, Y.W. Kim, D.H. Cho, H.B. Lee, and H.J. Lim, "Microstructure and Mechanical Properties of Self-Reinforced Alpha-Silicon Carbide, Ceram. Int., 24, 489-495 (1998)."

J46.

K.S. Cho, H.J. Choi, J.G. Lee, and Y.W. Kim, "Effects of Additive Amount on Microstructure and Fracture Toughness of SiC-TiB2 Composites, Ceram. Int., 24, 299-305 (1998)."

J45.

K.S. Cho, H.J. Choi, J.G. Lee, and Y.W. Kim, "In-Situ Enhancement of Toughness of SiC-TiB2 Composites, J. Mater. Sci., 33, 211-214 (1998)."

J44.

J.Y. Kim, Y.W. Kim, and J.G. Lee, "Effect of Grain Boundary Composition on Microstructure and Mechanical Properties of Silicon Carbide, J. Korean Ceram. Soc., 35 [9] 911-916 (1998)."

J43.

H.J. Choi, K.S. Cho, J.G. Lee, and Y.W. Kim, "R-Curve Behavior of Silicon Nitride-Titanium Nitride Composites, J. Am. Ceram. Soc., 80 [10] 2681-2684 (1997)."

J42.

D.H. Cho, Y.W. Kim, and W. Kim, "Strength and Fracture Toughness of In-Situ-Toughened Silicon Carbide, J. Mater. Sci., 32, 4777-4782 (1997)."

J41.

H.J. Choi, J.G. Lee, and Y.W. Kim, "High Temperature Strength and Oxidation Behaviour of Hot-Pressed Silicon Nitride-Disilicate Ceramics, J. Mater. Sci., 32, 1937-1942 (1997)."

J40.

Y.W. Kim, W.J. Kim, and D.H. Cho, "Effect of Additive Amount on Microstructure and Mechanical Properties of Self-Reinforced Silicon Carbide, J. Mater. Sci. Lett., 16, 1384-1386 (1997)."

J39.

Y.W. Kim, M. Mitomo, and H. Hirotsuru, "Microstructural Development of Silicon Carbide Containing Large Seed Grains, J. Am. Ceram. Soc., 80 [1] 99-105 (1997)."

J38.

J.Y. Kim, Y.W. Kim, K.S. Cho, and J.G. Lee, "Thermal Shock Behavior of Barium Titanate Ceramics, Korean J. Ceram., 3 [3] 195-198 (1997)."

J37.

Y.W. Kim, K.S. Cho, and H.J. Choi, "Effect of SiC Whisker Addition on Microstructure and Mechanical Properties of Silicon Carbide, J. Korean Asso. Cryst. Growth, 7 [3] 473-480 (1997)."

J36.

Y.W. Kim, W. Kim, K.S. Cho, and H.J. Choi, "Effect of ?-SiC Seed on Microstructure and Fracture Toughness of Pressureless-Sintered ?-SiC, J. Korean Asso. Cryst. Growth, 7 [1] 18-26 (1997)."

J35.

K.S. Cho, Y.W. Kim, H.J. Choi, and J.G. Lee, "SiC-TiC and SiC-TiB2 Composites Densified by Liquid Phase Sintering, J. Mater. Sci., 31, 6223-6228 (1996)."

J34.

Y.W. Kim, M. Mitomo, and J.G. Lee, "Influence of Silica Content on Liquid Phase Sintering of Silicon Carbide with Yttrium-Aluminum Garnet, J. Ceram. Soc. Jpn., 104 [9] 816-818 (1996)."

J33.

M. Mitomo, Y.W. Kim, and H. Hirotsuru, "Fabrication of Silicon Carbide Nanoceramics, J. Mater. Res., 11 [7] 1601-1604 (1996)."

J32.

K.S. Cho, Y.W. Kim, H.J. Choi, and J.G. Lee, "In Situ-Toughened Silicon Carbide -Titanium Carbide Composites, J. Am. Ceram. Soc., 79 [6] 1711-1713 (1996)."

J31.

H.J. Choi, Y.W. Kim, and J.G. Lee, "Effect of Amount and Composition of Additives on the Fracture Toughness of Silicon Nitride, J. Mater. Sci. Lett., 15, 375-377 (1996)."

J30.

Y.W. Kim, J.G. Lee, M.S. Kim, and J.H. Park, "Effect of Multilayer Coating on Mechanical Properties of Nicalon-Fiber-Reinforced Silicon Carbide Composites, J. Mater. Sci., 31, 335-338 (1996)."

J29.

H.J. Choi, Y.W. Kim, and J.G. Lee, "High Temperature Strength and Oxidation Behaviour of Er2Si2O7-Si3N4 Ceramics, J. Mater. Sci. Lett., 15, 282-284 (1996)."

J28.

H.J. Choi, J.G. Lee, and Y.W. Kim, "Effect of Grain Growth on the Flexural Strength and Fracture Toughness of Gas Pressure Sintered Silicon Nitride, J. Korean Ceram. Soc., 33 [11] 1187-1194 (1996)."

J27.

Y.W. Kim, M. Mitomo, and H. Hirotsuru, "Microstructure and Polytype of In Situ-Toughened Silicon Carbide, Korean J. Ceram., 2 [3] 152-156 (1996)."

J26.

Y.W. Kim, K.S. Cho, and J.G. Lee, "Effect of Large ?-Silicon Carbide Seed Grains on Microstructure and Fracture Toughness of Pressureless-Sintered ?-Silicon Carbide, Korean J. Ceram., 2 [1] 39-42 (1996)."

J25.

Y.W. Kim, M. Mitomo, and H. Hirotsuru, "Grain Growth and Fracture Toughness of Fine-Grained Silicon Carbide Ceramics, J. Am. Ceram. Soc., 78 [11] 3145-3148 (1995)."

J24.

Y.W. Kim, M. Mitomo, and N. Hirosaki, "R-Curve Behavior and Microstructure of Sintered Silicon Nitride, J. Mater. Sci., 30, 5178-5184 (1995)."

J23.

Y.W. Kim, M. Mitomo, and N. Hirosaki, "R-Curve Behavior of Sintered Silicon Nitride, J. Mater. Sci., 30, 4043-4048 (1995)."

J22.

Y.W. Kim, S.W. Park, and J.G. Lee, "Composition and Hardness of Chemically Vapor Deposited Silicon Carbide with Various Microstructures, J. Mater. Sci. Lett, 14, 1201-1203 (1995)."

J21.

Y.W. Kim and J.G. Lee, "Strengthening of Silicon Carbide by Surface Compressive Layer, J. Mater. Sci., 30, 1005-1008 (1995)."

J20.

D.J. Kim, D.J. Choi, and Y.W. Kim, "Effect of Reactants Depletion on the Microstructure and Preferred Orientation of Polycrystalline SiC Films by Chemical Vapor Deposition, Thin Solid Films, 266, 192-197 (1995)."

J19.

Y.W. Kim, H. Tanaka, M. Mitomo, and S. Otani, "Influence of Powder Characteristics on Liquid Phase Sintering of Silicon Carbide, J. Ceram. Soc. Jpn., 103 [3] 257-261 (1995)."

J18.

W. Kim and Y.W. Kim, "Liquid Phase Sintering of Silicon Carbide, J. Korean Ceram. Soc., 32 [10] 1162-1168 (1995)."

J17.

D.J. Kim, Y.W. Kim, S.W. Park, D.J. Choi, and J.G. Lee "Effects of Preferred Orientation and Microstructure on Mechanical Properties of Chemically Vapor Deposited SiC, J. Korean Ceram. Soc., 32 [10] 1103-1110 (1995)."

J16.

D.J. Kim, D.J. Choi, Y.W. Kim, and S.W. Park, "A Study on the Surface Modification of Graphite by CVD SiC-Growth Characteristics of SiC in a Horizontal CVD Reactor, J. Korean Ceram. Soc., 32 [4] 419-428 (1995)."

J15.

W. Kim and Y.W. Kim, "Texture in Hot-Pressed Silicon Carbide, J. Korean Asso. Cryst. Growth, 5 [4] 343-350 (1995)."

J14.

Y.W. Kim, H.J. Choi, J.G. Lee, S.W. Lee, and S.K. Chung, "Properties of Electrical Discharge Machinable SiC-TiB2 Composites, Korean J. Ceram., 1 [3] 125-130 (1995). "

J13.

H.J. Choi, Y.W. Kim, J.G. Lee, S.W. Lee, and S.K. Chung, "Fabrication and Characterization of Electrical Discharge Machinable Si3N4-TiN Composites, Korean J. Ceram., 1 [2] 101-105 (1995)."

J12.

H.J. Choi, Y.W. Kim, and J.G. Lee, "Effect of Sintering Additives on the Oxidation Behavior of Hot Pressed Silicon Nitride, J. Korean Ceram. Soc., 31 [7] 777-783 (1994)."

J11.

J.S. Song, Y.W. Kim, D.J. Kim, D.J. Choi, and J.G. Lee, "Low Pressure Chemical Vapor Deposition of Silicon Carbide, J. Korean Ceram. Soc., 31 [3] 257-264 (1994)."

J10.

Y.W. Kim, J.S. Song, S.W. Park, and J.G. Lee, "Nicalon-Fibre-Reinforced Silicon Carbide Composites via Polymer Solution Infiltration and Chemical Vapor Infiltration, J. Mater. Sci., 28, 3866-3868 (1993)."

J9.

M.S. Kim, Y.W. Kim, K.S. Han, and J.H. Park, "Nicalon-Fiber-Reinforced SiC Composites Via Infiltration, J. Korean Ceram. Soc., 30 [12] 993-998 (1993)."

J8.

M.S. Kim, Y.W. Kim, J.G. Lee, and D.S. Cheong, "Effect of Interlayer Thickness on Mechanical Properties of Nicalon-Fiber-Reinforced SiC Composites, J. Korean Ceram. Soc., 30 [7] 549-556 (1993)."

J7.

Y.W. Kim and J.G. Lee, "Effect of Polycarbosilane Addition on Mechanical Properties of Hot-Pressed Silicon Carbide, J. Mater. Sci., 27, 4746-4750 (1992)."

J6.

Y.W. Kim and J.G. Lee, "Pressureless Sintering of Al2O3-SiC Whisker Composites, J. Mater. Sci., 26, 1316-1320 (1991)."

J5.

J.S. Song, Y.W. Kim, J.S. Lee, and J.G. Lee, "Reliability Analysis of Statistical Failure Probability in Sin/Hip Si3N4 (II), J. Korean Ceram. Soc., 27 [3] 321-328 (1990)."

J4.

Y.W. Kim and J.G. Lee, "Pressureless Sintering of Alumina-Titanium Carbide Composites, J. Am. Ceram. Soc., 72 [8] 1333-1337 (1989)."

J3.

W.S. Hahn, Y.W. Kim, S.H. Lee, K.Y. Jang, and J.G. Lee, "A Study on the Subcritical Crack Growth and the Life Prediction for Sintered Silicon Carbide, J. Korean Ceram. Soc., 22 [4] 26-32 (1985)."

J2.

Y.H. You, Y.W. Kim, J.G. Lee, and C.H. Kim, "The Effect of Surface Finish and Grain Size on the Strength of Sintered SiC, J. Korean Ceram. Soc., 21 [1] 27-32 (1984)."

J1.

Y.W. Kim and J.G. Lee, "Reactive Sintering of Silicon Carbide, J. Korean Ceram. Soc., 20 [2] 115-122 (1983)."

    Conference Proceedings

C51

K.Y. Lim, T.Y. Cho, Y.-W. Kim, and S.J. Lee, “Effect of Initial Alpha-SiC Content on Thermal Conductivity of  Silicon Carbide Ceramics,” Key Eng. Mater., 616, 23-26 (2014).

C50

B. V. Manoj Kumar, J. H. Eom, and Y.-W. Kim, “Porosity and Strength of Polysiloxane-derived Porous SiC Ceramics Prepared using SiC and PCS Fillers,” Proc. the 27th Inter. Korea-Japan Seminar on Ceramics, Songdo, Korea, 2010.

C49

J. H. Eom, B. V. Manoj Kumar, and Y.-W. Kim,“Processing of Porous Mullite-bonded SiC Ceramcs,”Proc. the 27th Inter. Korea-Japan Seminar on Ceramics, Songdo, Korea, 2010.

C48

M. Narisawa, R.-I. Sumimoto, K.-I. Kita, H. Mabuchi, Y.-W. Kim, M. Sugimoto, M. Yoshikawa, “Investigation of Curing Process on Melt Spun Polymethylsilsesquioxane Fiber as Precursor for Silicon Oxycarbide Fibers,” Adv. Mater. Res., 66, 1-4 (2009).

C47

Y.-W. Kim, T. Nishimura and M. Mitomo, “Influence of Additives on Mechanical Properties in Liquid-Phase Sintered Silicon Carbide Ceramics,” Key Eng. Mater., 403, 185-188 (2009).

C46

Y. H. Choi, J. H. Eom, Y.-W. Kim, S. K. Woo, and I. S. Han, “Processing and Properties of Porous Silicon Carbide Membrane Supports for Gas Cleaning,” Proc. the 10th Inter. Symposium On East Asian Resources Recycling Technology, pp. 855-858, Jejodu, Korea, 2009.

C45

Y.-W. Kim, J. H. Eom, S. H. Chae, I. H. Song, and H. D. Kim, “Engineering Porosity in Silicon Carbide Ceramics,” Proc. the 26th Inter. Japan-Korea Seminar on Ceramics, pp. 107-110, Tsukuba, Japan, 2009.

C44

I.H. Song, Y.M. Kim, H.D. Kim, and Y.-W. Kim, “Investigation on the Duplex Pore Structure of the Microcellular SiC Ceramics Using Preceramic Polymer”, Proc. the 24th Inter. Korea-Japan Seminar on Ceramics, pp. 285-288, Kakegawa, Shizuoka, Japan (2007).

C43

Y.-W. Kim, J.H. Lee and D.Y. Kim, “Effect of Sintering Additive Composition on Grain Boundary Structure in Liquid-Phase-Sintered Silicon Carbide”, Mater. Sci. Forum, 558-559, 897-902 (2007).

C42

Y.-W. Kim, D.H. Jang, J.H. Eom, I.H. Song, and H.D. Kim, "Processing of Polymer-Derived Microcellular Ceramics  Containing Reactive Fillers", Mater. Sci. Forum, 534-536, 989-992 (2007).

C41

Y.-W. Kim, Y.S. Chun, S.H. Lee, J.Y. Park, T. Nishimura, M. Mitomo, and W.S. Ryu, "Microstructure and Mechanical Properties of Heat-Resistant Silicon Carbide Ceramics", Key Eng. Mater.,336-338, 1409-1413(2007).

C40

Y.-W. Kim, S.H. Kim, C.B. Park, and H.D. Kim, “Processing and Mechanical Properties of Microcellular Ceramics,” Key Eng. Mater. 317, 899-903 (2006).

C39

Y.-W. Kim, S.H. Kim, C.B. Park, H.D. Kim, "Processing and Mechanical Properties of Microcellular Ceramics", Key Eng. Mater., 317-318, 899-904 (2006).

C38

Y.-W. Kim, S.H. Kim, T. Nishimura, M. Mitomo, J.H. Lee, and D.-Y. Kim, "Fabrication of Heat-Resistant Silicon Carbide Ceramics by Controlling Intergranular Phase”, Key Eng. Mater. 287, 299-310 (2005). 

C37

Y-W. Kim, “Development of High Performance Silicon Carbide Ceramics,” Proc. of JSSUME 2004, pp. 406-411, Yokohama, Japan, 2004.

C36

Y-W. Kim, C.B. Park, and H.D. Kim, "Processing and Properties of Microcellular Ceramics”, Abstract Book of EnCera04, pp. 154-155, Osaka, Japan, 2004

C35

S.H. Lee, Y.I. Lee, Y.S. Chun, and Y.-W. Kim, “Nanostructured Silicon Carbide Ceramics”, Proc. the 21st Inter. Korea-Japan Seminar on Ceramics,” pp. 607-611, Gwangju, Korea, 2004.

C34

Y.-W. Kim, S.H. Lee, T. Nishimura, M. Mitomo, J.H. Lee, and D.Y. Kim, “Fabrication of Heat-Resistant Silicon Carbide Ceramics by Controlling Intergranular Phase Chemistry,” Abstract Book of Inter, Symposium on New Frontier of Advanced Si-Based Ceramics and Composites (ISASC-2004), p. 78, Gyeongju, Korea, 2004.

C33

Y.S. Chun, S.H. Kim, and Y.-W. Kim, “Processing and Mechanical Properties of Microcellular SiOC Ceramics,” Abstract Book of ISASC-2004, p. 52, Gyeongju, Korea, 2004.

C32

S.H. Kim and Y.-W. Kim, “Fabrication of Microporous Ceramics,” Proc. the 17th Symp. on Refractories,” pp. 9-12, Seoul, Korea, 2003.

C31

Y-W. Kim, S.H. Kim, C. Wang, C.B. Park, and H.D. Kim, "Processing of Microcellular Ceramics," Abstract Book of PacRim5, p.209, Nagoya, Japan, 2003

C30

S.H. Kim, Y.I. Lee, and Y.-W. Kim, “Machinable SiC-BN Composites with Oxynitride Glass,” Proc. the 20^th Japan-Korea Seminar on Ceramics, pp. 493-496, Matsue, Japan, 2003.

C29

Y.-W. Kim, S.H. Kim, M. Mitomo, and T. Nishimura, “High-Temperature Strength of Liquid-Phase-Sintered SiC Ceramics with Oxynitride Glass,” Key Eng. Mater., 247, 267-270 (2003); Proceedings of the 2^nd International Symposium on Advanced Ceramics, Shanghai, China, 2002.

C28

W, Kim, Y.-W. Kim, and M.H. Choi, “Texture Development and Phase Transformation in Liquid-Phase-Sintered SiC Ceramics,” Mater. Sci. Forum, 408-412, 1693-1698 (2002); Proceedings of the 13^th International Conference on Textures of Materials, Seoul, Korea, 2002. 

C27

Y.I. Lee, S.H. Kim, and Y.-W. Kim, “Microstructure and Fracture Toughness of SiC-Based Composites,” Proc. the 19^th Japan-Korea Seminar on Ceramics, pp. 504-508, Seoul, Korea, 2002.

C26

Y.-W. Kim and S.H. Kim, “Development of Microcellular Ceramics Processing,” Proc. the 1^st 21C Frontier R&D Program Workshop on Advanced Materials Processing, pp. 197-201, Cheju, Korea, 2002.

C25

Y.W. Kim, M. Mitomo, T. Nishimura, and G.D. Zhan, “Heat Resistant Silicon Carbide Ceramics with Improved Toughness,” Abstract Book of the 103^rd Annual Meeting & Exposition of the Amer. Ceram. Soc., p. 22, Indianapolis, USA, 2001.

C24

W.T. Kwon, J.S. Park, K.J. Kim, and Y.-W. Kim, “Material Development of Si₃N₄-SiC Composites for Machining Application,” Proc. of the 16^th Annual Meeting of the Am. Soc. for Precision Eng., pp. 449-452, Arlington, USA, 2001.

C23

J.S. Park, K.J. Kim, S.K. Lee, W.T. Kwon, and Y-W. Kim, “Effect of Sintering Time and Composition on Cutting Characteristics of SiC-Si₃N₄ Ceramic Tools,” Proc. of the Korean Soc. Machine Tools Engineers 2001, pp. 321-326, Korea, 2001.

C22

H.G. An, Y.-W. Kim, and J.G. Lee, “Effect of Initial a/b Ratio of SiC on Microstructure and Fracture Toughness of SiC-TiC Composites,” Abstract Book of the 102^nd Annual Meeting & Exposition of the Am. Ceram. Soc., p. 326, St. Louis, USA, 2000.

C21

S.G. Lee, Y.-W. Kim, and M. Mitomo, “Relationship Between Microstructure, Toughening Mechanism, and Fracture Toughness of Self-Reinforced Silicon Carbide Ceramics,” Abstract Book of the 102^nd Annual Meeting & Exposition of the Am. Ceram. Soc., p. 325, St. Louis, USA, 2000.

C20

Y-W. Kim and S.G. Lee, “Microstructure and Fracture Toughness of Liquid-Phase Sintered Silicon Carbide,” Proc. of the 2^nd Inter. Japan-Korea Symp. on Advanced Eng. & Sci., pp. 421-428, Yokohama, Japan, 2000.

C19

J.S. Park, K.J. Kim, W.T. Kwon, and Y-W. Kim, “Cutting Characteristic of SiC-Si₃N₄ Ceramic Cutting Tools,” Proc. of KSPE 2000, pp. 898-901, Korea, 2000.

C18

K.J. Kim, J.S. Park, W.T. Kwon, and Y-W. Kim, “Cutting Characteristic of In Situ Toughened SiC-Si₃N₄ Composite,” Proc. of the Korean Soc. Machine Tools Engineers 2000, pp. 386-391, Korea, 2000. 

C17

Y.-W. Kim, J.Y. Kim, M. Mitomo, G.D. Zhan, and J.G. Lee, “Microstructure of Silicon Carbide with Yttrium-Aluminum Garnet and Silica,” Key Eng. Mater., 161-163, 247-250 (1999); Proceedings of the 2^nd International Symposium on the Science of Engineering Ceramics (EnCera 98), Osaka, Japan, 1998.

C16

G.D. Zhan, M. Mitomo, H. Sato, and Y.-W. Kim, “Fabrication and Mechanical Properties of Fine-Grained Silicon Carbide Ceramics,” Key Eng.Mater., 161-163, 243-246 (1999); Proceedings of the 2^nd International Symposium on the Science of Engineering Ceramics (EnCera 98), Osaka, Japan, 1998. 

C15

K.S. Cho, H.J. Choi, J.G. Lee, and Y.-W. Kim, “Layered Silicon Nitride Ceramics with Improved Flaw Tolerance,” Key Eng. Mater., 159-160, 245-250 (1999); Proceedings of the Novel Synthesis and Processing of Ceramics, Kurume, Japan, 1998.

C14

H.J. Lim, C.S. Lee, S. Kim, D.H. Cho, and Y-W. Kim, “The Improvement of High Temperature Mechanical Properties of Silicon Nitride Ceramics,” Proc. the 15^th Japan-Korea Seminar on Ceramics, pp. 249-253, Kyongju, Korea, 1998.

C13

J.Y. Kim, Y-W. Kim, M. Mitomo, G.D. Zhan, J.G. Lee, “Microstructure and Mechanical Properties of Self-Reinforced Silicon Carbide,” Abstract Book of the 3^rd Inter. Meeting of Pacific Rim Ceramic Socierties (PacRim 3), p.122, Kyongju, Korea, 1998.

C12

J.G. Lee, H.J. Choi, K.S. Cho, and Y-W. Kim, “R-Curve Behavior of Layered Silicon Carbide Ceramics,” Abstract Book of PacRim 3, p.123, Kyongju, Korea, 1998. 

C11

H.J. Choi, J.G. Lee, and Y-W. Kim, “Squeezing Out of Grain Boundary Glassy Phase in Hot-Pressed Silicon Nitride,” Abstract Book of PacRim 3, p.122, Kyongju, Korea, 1998.

C10

Y-W. Kim, M. Mitomo, H. Emoto, and J.G. Lee, “Effect of a/b Phase Ratio on Densification and Microstructure of Silicon Carbide,” Proc. of the 6^th Inter. Symp. on Ceramic Mater. and Components for Engines, pp. 638-642, Arita, Japan, 1997.

C9

W. Kim and Y-W. Kim, “Textures and Mechanical Properties of Silicon Carbide,” Proc. of the 6^th Inter. Symp. on Ceramic Mater. and Components for Engines, pp425-430, Arita, Japan, 1997.  

C8

H.J. Lim, C.S. Lee, D.H. Cho, and Y-W. Kim, “Mechanical Properties of Self-Reinforced Alpha-Silicon Carbide,” Proc. the 14^th Japan-Korea Seminar on Ceramics, pp. 226-230, Kanazawa, Japan, 1997.

C7

W. Kim and Y.-W. Kim, “Texture and Microstructure in Silicon Carbide,” Proc. the 11^th Inter. Conf. on Textures Mater., pp. 992-997, Xi’an, China, 1996.

C6

T. Nishimura, M. Mitomo, and Y.-W. Kim, “Crack Healing of Silicon Nitride Ceramics,” Proc. the 5th Symp.  Intelligent Mater., pp.44-46, Tokyo, Japan, 1996.

C5

M. Mitomo, H. Hirotsuru, and Y.-W. Kim, “Effect of Seed Grains on the Microstructural Development of Silicon Carbide,” Proc. the 12th Japan-Korea Seminar on Ceramics, pp. 348-352, Tsukuba, Japan, 1995.

C4

M. Mitomo, T. Nishimura, and Y.-W. Kim, “Fracture Resistance of Engineering Ceramics,” Proc. the 4th Symp.  Intelligent Mater., pp.19-21, Tokyo, Japan, 1995.

C3

Y.-W. Kim and J.G. Lee, "Tape Casting of Silicon Nitride,” Mater. Res. Soc. Symp. Proc. Vol 287, pp265-270, Boston, USA, 1993.

C2

Y.-W. Kim and J.G. Lee, "Nicalon Fiber-Reinforced Silicon Carbide Composites,” Proc. the 8th Japan-Korea Seminar on Ceramics, pp. 188-191, Nagoya, Japan, 1991.

C1

Y.-W. Kim and J.G. Lee, "Effect of Polycarbosilane Addition on Mechanical Properties of Silicon Carbide,” Proc. the 1st Conference on Armor Materials, pp. 47-65, Daejeon, Korea, 1990.